please help me my dsl [sbc yahoo dsl]

[tibsoul3200]

recently i have been tweaking by myself but i could only go up to like 85-86& of the time using TCP optimizer. can you guys help me tweak it more?

i have [2wire] 2700HG-B Gateway which is the modem/router.
the internet connection what i supposed to get is 3008/512
i have windows xp w/ sp2.
i live in the US in Wisconsin,madison.
i use PPPoe.

the ave. speed of what i get is about 2.572 / 433 .

-------------------- ---------------
this is what the TCP Analyze said:

« SpeedGuide.net TCP Analyzer Results »
Tested on: 03.26.2007 23:17
IP address: 76.201.xxx.xx

TCP options string: 020405ac0103030001010402
MSS: 1452
MTU: 1492
TCP Window: 17424 (multiple of MSS)
RWIN Scaling: 0
Unscaled RWIN : 17424
Reccomended RWINs: 63888, 127776, 255552, 511104
BDP limit (200ms): 697kbps (87KBytes/s)
BDP limit (500ms): 279kbps (35KBytes/s)
MTU Discovery: ON
TTL: 34
Timestamps: OFF
SACKs: ON
IP ToS: 01000000 (64)
Precedence: 010 (immediate)
Delay: 0 (normal delay)
Throughput: 0 (normal throughput)
Reliability: 0 (normal reliability)
Cost: 0 (normal cost)
Check bit: 0 (correct)
DiffServ: CS2 010000 (16) - class 2 (RFC 2474). Similar forwarding behavior to the ToS Precedence field.

--------------------------------------------

but this is what i have on my TCP optimizer.

TCP Receive Window: 16544
MTU: 1492
MaxConnectionsPerServer: 10
MaxConnectionsPer1_0Server: 20
LocalPriority: 5
HostPriority: 6
DnsPriority: 7
NetbtPriority: 8
ToS: DefaultTosValue: 80
LAN Request Buffer Size: 32768

------------------------------------------------------------


WEB100 Enabled Statistics:
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
running 10s outbound test (client to server) . . . . . 440.83Kb/s
running 10s inbound test (server to client) . . . . . . 2.58Mb/s

------ Client System Details ------
OS data: Name = Windows XP, Architecture = x86, Version = 5.1
Java data: Vendor = Sun Microsystems Inc., Version = 1.5.0

------ Web100 Detailed Analysis ------
Cable modem/DSL/T1 link found.
Link set to Full Duplex mode
No network congestion discovered.
Good network cable(s) found
Normal duplex operation found.

Web100 reports the Round trip time = 55.43 msec; the Packet size = 1452 Bytes; and
No packet loss - but packets arrived out-of-order 0.09% of the time
This connection is receiver limited 97.88% of the time.
This connection is network limited 2.09% of the time.

Web100 reports TCP negotiated the optional Performance Settings to:
RFC 2018 Selective Acknowledgment: ON
RFC 896 Nagle Algorithm: ON
RFC 3168 Explicit Congestion Notification: OFF
RFC 1323 Time Stamping: OFF
RFC 1323 Window Scaling: OFF
Information: Network Middlebox is modifying MSS variable
Server IP addresses are preserved End-to-End
Client IP addresses are preserved End-to-End

---------------------------------------------------------


<img src="http://i55.photobucket.com/albums/g152/tibsoul/Untitled-1-1.jpg">

p/s my computer is free of any spyware/virus/adware...etc.



thank you..........

[mccoffee]

Try thease in the sg optmizer below me to download and install make sure your allowing ping/icmp though on the router. Your speeds aren't bad try those.

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU 1492
TTL - 64
TCP Receive Window -63888
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - checked
Timestamps - uncheck
Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 240
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect
b]VERY IMPORTANT TO DO THE FOLLOWING:[/b]
1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need. For a stand alone pc all you need is Internet Protocol TCP/IP.
2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.
3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer and set your duplex mode to "auto". If you are using a router make sure you have the latest firmware.
4. Clean out your temporary internet files with CrapCleaner.
5. Power cycle your modem i.e. unplug it for at least 15 seconds.
6. Download, update and scan with SpyBot S&D 1.4, Ad-Aware SE 1.06 & ewido anti-spyware 4.0 to remove any spyware then install and update SpywareBlaster 3.5.1 to stay spyware FREE.
7. Make sure you do the faster web page tweak in our Help & Tips page.
8. If you aren't currently using a firewall then I suggest you install Kerio Personal Firewall 2.1.5, it's FREE and uses next to no resources.
9. Do a FREE online virus scan from BitDefender Online Scan and remove all that it finds.
10. Make sure you have ALL of the latest Windows Updates.
8)