wbr 1310 problems...

Osiris3369 · 10-15-09, 10:49 PM

hey everyone,

I have a wbr 1310 and i can't seem to get into the 192.168.0.1 to change any of the settings. I'm trying to put a password on my wireless network but since I can't get into the site, and I can't find the disk that they have for it, I can't do anything...

any ideas on something that might help me out would be greatly appreciated

Osiris

PACSman · 10-27-09, 04:52 PM

1) open web browser
2) on address line type in 192.168.0.1
3) this should bring up the router login page
4) if you haven't already logged in previously and changed the password, use Username: Admin and Password: Press <Enter> key
5) That "should" get you in

You can download the manual from:

http://office.manualsonline.com/manu...d_wbr1310.html

Look in the "Member Contributed Manuals" section

Osiris3369 · 10-28-09, 04:12 PM

I know that, but the 192.168.0.1 address only brings me to a page that says that the link is broken

lenwest · 11-02-09, 05:03 PM

Connect by Cat5 and try again. Be sure the address is 192.168.0.1
From a cmd prompt, type ipconfig /all and see what the gateway IP is.

10-15-09, 10:49 PM	#1
Osiris3369 Junior Member Join Date: Oct 2009 Posts: 2	wbr 1310 problems... hey everyone, I have a wbr 1310 and i can't seem to get into the 192.168.0.1 to change any of the settings. I'm trying to put a password on my wireless network but since I can't get into the site, and I can't find the disk that they have for it, I can't do anything... any ideas on something that might help me out would be greatly appreciated Osiris

10-27-09, 04:52 PM	#2
PACSman Junior Member Join Date: Oct 2009 Posts: 1	wbr 1310 problems... 1) open web browser 2) on address line type in 192.168.0.1 3) this should bring up the router login page 4) if you haven't already logged in previously and changed the password, use Username: Admin and Password: Press <Enter> key 5) That "should" get you in You can download the manual from: http://office.manualsonline.com/manu...d_wbr1310.html Look in the "Member Contributed Manuals" section Last edited by PACSman; 10-27-09 at 05:11 PM. Reason: Additional Info

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
have anyone work with a cisco aironet 1310 before	albertldee	Networking Forum	0	09-07-09 06:22 PM
Frustrated about Vista WLAN connectivity problems	Boris Schaeling	ms.public.windows.networking.wireless	11	02-22-09 04:29 AM
Comcast Problems.. Anyone having the same issue as me?	CoteJM	Routers & Internet Sharing	1	02-23-08 01:36 PM
Having problems running battlefield 2 with my radeon 9800 pro	ojminers	Gaming	8	11-24-07 07:07 AM
Problems at the Goole Exchange	db00707	General Broadband Forum	0	09-12-07 07:41 AM

10-28-09, 04:12 PM	#3
Osiris3369 Junior Member Join Date: Oct 2009 Posts: 2	I know that, but the 192.168.0.1 address only brings me to a page that says that the link is broken

11-02-09, 05:03 PM	#4
lenwest Regular Member Join Date: Apr 2002 Location: Toronto Posts: 271	Connect by Cat5 and try again. Be sure the address is 192.168.0.1 From a cmd prompt, type ipconfig /all and see what the gateway IP is.