What in god's name do I have herre

[CaptDave]

Man,

Ran the generic registry patch with significant improvement. Here's my analysis: should I tweak the web loading patch since my pages do hang momentarily and then skyrocket to the home page. Once at the sight, movement therein is good. Please forgive my naivete and if you guys got some insight, please let me have it.

TCP options string = 020405b401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.

Default Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 65535
Note: Under Windows 9x, if you have RWIN set to any other value, and the Analyzer reports 65535 you might need to install the MS Vtcp386 fix.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = OFF

Time to live left = 50 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

Thanks,

Dave

[MadDoctor]

I see win 98 SE. Do you have the cablenut adjuster (you need to fix a few things)

BTW... Welcome to Speed Guide!

MD

[MadDoctor]

You might want to go here If your RWIN is 65535 then you need the Vtcp386th Fix patch if on OS's of 95/98/SE or set Tcp1323 Opts to 1 to allow scaling.

DSL I see. Sorry I'm not a DSL guy. Evil might be along though.

[CaptDave]

Ok, what's a speed nut adjuster? I'll go get it and will it be foolproof or will I need to back up? I assume it'll be in the tweaking or advanced areas?!

Dave

[MadDoctor]

Go to the cablenut web page (where the adjuster is) and read, read, read. It does make changes to your registry so it will need to be backed up. Cablenut web page will tell you how. I'm off to bed. Like I said... read and do it in the morning when you're fresh.

[funky]

actually, there is no need to backup when you install since you can always delete the tweaks by pressing the button in the Cablenut Adjuster. Unless you find a setting that you are good with, which we will show you when you wake up, there's really no need for backup. Cablenut will NOT do any harm to you if you can follow our instructions.

[CaptDave]

Thanks for the feedbacxk.

Hiked up to 13,000 feet out here today, may as well lay these bones down for some rest.

I get a real good feel here....seems like a place to live and learn.

Later, guys,

Dave

[funky]

Get a good long sleep, because tommorrow is gonna be another big day for you.

[Lobo]

Click on help thread below in signature and follow directions exactly, please leave your OS and system specs if you have not done so.Also if you have Cablenuts adjuster installed I need to know that. There are some Tips and how to do speed test on help thread. Thank you and good luck. Please do this AFTER you install patches:

Please click in my signature where it says Test tweak here, then:
At top where it says edit click and select, Select all,
Then go back to same edit button at top, click and select copy.
Come back to Speedguide, same thread you were on, in post reply box, with cursor blinking at begining of box go to top, edit, click, select paste, click, this will put information in box. Please X out your IP address, Thank you.

[funky]

Let him sleep Lobo.. let him sleep.

[Lobo]

I just left directions for tomorrow,lol

[Kno One]

sleepno no no no you have broadband you cant sleepyou MUST BE ONLINE 24/7 hahahahaHAHA


huh? what? whoa what did i just type oh man im sorry sleepdeprivation makes me do phunny things

[CaptDave]

Fellas:

Here's what I got: after generic registry patch, 386 patch, and web page patch. Did a quick check and got 635 down and 525 up. Was getting 665 with just generic patch.

Saving registry after each patch.

Suggestions? I admit to not going past this point - no defrag, etc.

Thanks,

Dave

- - - - - -



SpeedGuide.net TCP/IP Analyzer
TCP properties for IP =
Note: Read the FAQ if the above is not your IP address.
Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows 98)

TCP options string = 020405b4010303020101080a000000000000000001010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1448, which is less than MSS because of Timestamps, or other TCP/IP options used.

Default Receive Window (RWIN) = 256960
RWIN Scaling (RFC1323) = 2 bits
Unscaled Receive Window = 64240
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms
Your RcvWindow limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = OFF

Time to live left = 50 hops
TTL value is ok.

Timestamps (RFC1323) = ON
Note: Timestamps add 12 bytes to the TCP header of each packet, reducing the space available for useful data.

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000




20712 connections tested since 03.10.2001.
Analyzer version: Beta 0.99

[CaptDave]

Oh, yeah,

Dell xps t600
WIN 98 SE
256K ram
Transedge sdsl 768 service
Efficient Networks SpeedStream router


mmmmmmmmmm....

anything else?

appreciate your patience.

BTW: did get cablenut too

Dave