[Newbie] Please Help, ADSL registery setting

[oariav]

Hello,

Sorry of its sounds lame or too much not preffeional.

I`m using ALACTEL adsl modem, with 100/10Mbps fast Ethernet Card. When I look for the registery location path - I can`t find it. evan if I add it my MaxMTU setting stays on 964. I can`t locate on my registery the keys required for the tweak change.

Any Ideas? If so, please contact me here/email or ICQ:8006935 .

Thank You Very Much,
Omri

The report from this site:
-------
TCP options string = 0204039c0103030201010402

MTU = 964
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput.

MSS = 924
Maximum useful data in each packet = 924, which is equal to MSS.
MSS is not fully optimized for broadband (although it might work well for slower connections). Consider increasing your MTU value.

Default Receive Window (RWIN) = 256960
RWIN Scaling (RFC1323) = 2 bits
Unscaled Receive Window = 64240
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
517440 (MSS x 70 * scale factor of 8)
258720 (MSS x 70 * scale factor of 4)
129360 (MSS x 70 * scale factor of 2)
64680 (MSS x 70)

bandwidth * delay product:
Your RcvWindow limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms
Your RcvWindow limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = OFF

Time to live left = 47 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

-----

[oariav]

Forgatted to add info on my system:
OS: Windows ME Hebrew Enabled
PIII550 390SDRAM, ALCATEL aDSL modem, 100/10Mbps Fast Ethernet Card.

More info as your request!

Thanks!
Omri
ICQ:8006935

[Lobo]

In registry set MTU Discovery to 1, main page this site, click on registry tweaks on left to tell you how and where, reboot, retest