need help tweaking RWIN.

[gamordz]

hi everyone.. need help concerning my tweaking in TCP IP OPTIMIZER... im new at this and i encountered repeating problem concerning changing RWIN....

my isp is Globelines broadband 384kbps...

this is my result of TCP IP ANALYZER.. need help of what im missing here....



MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising your MTU value.
Default TCP Receive Window (RWIN) = 66560
RWIN Scaling (RFC1323) = 8 bits (scale factor: 2^8=256)
Unscaled TCP Receive Window = 260

In Windows 7, unless "TCP/IP Auto-Tuning" is disabled, only the Current TCP Window is displayed. Use the SG Vista TCP/IP patch instead of the TCP Optimizer for automatic tweaking.
RWIN is not fully optimized (even though it is a comparatively large number). The unscaled RWIN value is lower than it should be. Also, RWIN being close to and above 65535 does not justify the header overhead of enabling TCP 1323 Options. You might want to use one of the recommended RWIN values below.

For optimum performance, consider changing RWIN to a multiple of MSS.
Other RWIN values that might work well with your current MTU/MSS:
63888 (up to 2 Mbit lines, depending on latency. MSS * 44)
127776 (1-5 Mbit lines, depending on latency. MSS * 44 * 2)
255552 (2-14 Mbit lines, depending on latency. MSS * 44 * 2^2)
511104 (8-30 Mbit lines, depending on latency. MSS * 44 * 2^3)
1022208 (25-60 Mbit lines depending on latency. MSS * 44 * 2^4)
bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 2662 kbps (333 KBytes/s) @ 200ms
Your TCP Window limits you to: 1065 kbps (133 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 47 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)

[Philip]

Windows 7 auto-tunes the RWIN value with each packet based on your network speed. It is safe to ignore the Analyzer warning, provided your throughput is close to your advertised value.