im no expert here. i need expert advice here.. my ISp is Globe Broadband here in the philippines. i have a 512 kbps subscribed speed. i am using a prolink hp9200 modem/router. any suggestions?
im no expert here. i need expert advice here.. my ISp is Globe Broadband here in the philippines. i have a 512 kbps subscribed speed. i am using a prolink hp9200 modem/router. any suggestions?
Post your TCP Analyzer report.
« SpeedGuide.net TCP Analyzer Results »
Tested on: 08.28.2007 10:13
IP address: 222.127.xxx.x
TCP options string: 020405480103030001010402
MSS: 1352
MTU: 1392
TCP Window: 41912 (multiple of MSS)
RWIN Scaling: 0
Unscaled RWIN : 41912
Reccomended RWINs: 64896, 129792, 259584, 519168
BDP limit (200ms): 1676kbps (210KBytes/s)
BDP limit (500ms): 671kbps (84KBytes/s)
MTU Discovery: ON
TTL: 45
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)
by the way, i am using windows xp sp2
Your MTU of 1392 is off the normal values.
Try the following with TCP Optimizer just to first adjust your MTU:
General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU 1500
TTL - 64
TCP Receive Window - leave blank
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - uncheck
Timestamps - uncheck
Advanced Settings tab:
Max Connections per Server - 8
Max Connections per 1.0 Server - 8
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 80
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect
After reboot, post a new TCP Analyzer report.
« SpeedGuide.net TCP Analyzer Results »
Tested on: 08.28.2007 10:47
IP address: 222.127.xxx.x
TCP options string: 020405480103030e01010402
MSS: 1352
MTU: 1392
TCP Window: 1073725440 (NOT multiple of MSS)
RWIN Scaling: 14
Unscaled RWIN : 65535
Reccomended RWINs: 64896, 129792, 259584, 519168
BDP limit (200ms): 42949018kbps (5368627KBytes/s)
BDP limit (500ms): 17179607kbps (2147451KBytes/s)
MTU Discovery: ON
TTL: 45
Timestamps: OFF
SACKs: ON
IP ToS: 01010000 (80)
Precedence: 010 (immediate)
Delay: 1 (low delay)
Throughput: 0 (normal throughput)
Reliability: 0 (normal reliability)
Cost: 0 (normal cost)
Check bit: 0 (correct)
DiffServ: AF22 010100 (20) - Assured Forwarding class 2, medium drop precedence (RFC 2597).
Log into your ProLink and set MTU or MRU to 1500 and MSS to 1460. Save and reboot the ProLink. Then post another TCP Analyzer report.
i cant seem to find MSS in my manual. but MTU is set to 1500 (default).
Check with your peers at this link to see if your Prolink has the latest firmware:
http://www.pinoydsl.net/viewforum.php?f=6
Your MTU should be either 1500, 1492 or 1480 before you can tweak your comp to optimum.
i already have the latest firmware version of prolink h9200. (v. 2.5.060823m) but still, my TCP analyzer repot says my MTU is not fully optimized for broadband.
« SpeedGuide.net TCP Analyzer Results »
Tested on: 08.29.2007 07:21
IP address: 222.127.xx.xxx
TCP options string: 020405480103030e01010402
MSS: 1352
MTU: 1392
TCP Window: 1073725440 (NOT multiple of MSS)
RWIN Scaling: 14
Unscaled RWIN : 65535
Reccomended RWINs: 64896, 129792, 259584, 519168
BDP limit (200ms): 42949018kbps (5368627KBytes/s)
BDP limit (500ms): 17179607kbps (2147451KBytes/s)
MTU Discovery: ON
TTL: 45
Timestamps: OFF
SACKs: ON
IP ToS: 01010000 (80)
Precedence: 010 (immediate)
Delay: 1 (low delay)
Throughput: 0 (normal throughput)
Reliability: 0 (normal reliability)
Cost: 0 (normal cost)
Check bit: 0 (correct)
DiffServ: AF22 010100 (20) - Assured Forwarding class 2, medium drop precedence (RFC 2597).
Try the following with TCP Optimizer:
General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU 1392
TTL - 64
TCP Receive Window - 64896
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - uncheck
Timestamps - uncheck
Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 10
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 80
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect
Have you installed some other tweak software besides TCP Optimizer?
« SpeedGuide.net TCP Analyzer Results »
Tested on: 08.29.2007 08:01
IP address: 222.127.xxx.xx
TCP options string: 0204054801010402
MSS: 1352
MTU: 1392
TCP Window: 64896 (multiple of MSS)
RWIN Scaling: 0
Unscaled RWIN : 64896
Reccomended RWINs: 64896, 129792, 259584, 519168
BDP limit (200ms): 2596kbps (324KBytes/s)
BDP limit (500ms): 1038kbps (130KBytes/s)
MTU Discovery: ON
TTL: 45
Timestamps: OFF
SACKs: ON
IP ToS: 01010000 (80)
Precedence: 010 (immediate)
Delay: 1 (low delay)
Throughput: 0 (normal throughput)
Reliability: 0 (normal reliability)
Cost: 0 (normal cost)
Check bit: 0 (correct)
DiffServ: AF22 010100 (20) - Assured Forwarding class 2, medium drop precedence (RFC 2597).
i havent done any tweakings before. this is my first time to do it. and i use SG TCP Optimizer for windows xp.
Test speed at this link using the test server in Quezon City and post your results:
http://www.speedtest.net/
Hi
Can you help me to "Trogers", I having all a dsl connection of Globe 512kbps.
I would like to speed up my internet connection
I am using the Globe Modem that they provide:
Huawei
Product: ADSL CPE
Model Name: SmartAX MT880a
« SpeedGuide.net TCP Analyzer Results »
Tested on: 06.09.2011 13:37
IP address: 112.198.xxx.xx
Client OS: Windows XP
TCP options string: 020405780103030e01010402
MSS: 1400
MTU: 1440
TCP Window: 1073725440 (NOT multiple of MSS)
RWIN Scaling: 14 bits (2^14=16384)
Unscaled RWIN : 65535
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 42949018kbps (5368627KBytes/s)
BDP limit (500ms): 17179607kbps (2147451KBytes/s)
MTU Discovery: ON
TTL: 46
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)
ops i forgot somethings i using Spyware Doctor to remove spyware/malware and TuneUp Utility tools to boost up my pc and clean error, registry, etc...
Last edited by medgard789; 06-09-11 at 12:53 PM. Reason: forgot somethings
Bookmarks