Using QOS on Router for Traffic Control Please Help

[Net knight]

Hi, I have a 4 Port +Wirelss AP which i share with other 4 guys

One of those Guys Download / P2p as HELL!!!!!! I get almsot 20% Timeouts when he uses p2p Shiit

Now i tried to Find something to control traffic over the 4 of us
Specially i Play games Online, but i found many ppl talking about QOS to be configured to Prioritize traffic (Bandwidth control)

The Router has QOS but i don`t know what exactly to Choose , which Ips to Add i Attached a Screen shot of the Router window @ QOS setteings



and Choices are :

Assign ATM Transmit Priority: low/Medium/High
Mark IP Precedence : 0~7
Mark IP Type Of Service : Normal Service/minimize Cost/
Maximize Reliability/Maximize throughput/
minimize Delay

Mark 802.1p if 802.1q is enabled on WAN: 0~7

SET 1 :
Physical LAN Port: (lan 1-4)/Wireless/Wireless_Guest

Protocol : Tcp/UDP TCp UDP ICMP

All options after that is IPs/ Subnet masks /Ports i must write down

SET 2
802.1p priority : 1~7

Router IP : 192.168.1.1
The Guy Alwasy downloading Ip is : 192.168.1.2
My Ip : 192.168.1.4

thats For the router ,

I also Have TCP optimizer on my PC Configured as Optimum and Adjusted Bandwidth at 256 Kb (i`m Gonna Upgrade it to 1 M.bit in couple of days)

is there is any setteings i can put Custom to improve performance!!


Thx in Advance for Any help and Thx Also to the Big names in this Forum i always benefited of thier knowledege

[mccoffee]

SET 2
802.1p priority : 7
Ip is : 192.168.1.2


You could try this as well find out what p2p programs hee is using get the ports for that program

SET 1 :
Physical LAN Port: what every port 192.168.1.2 ison
Protocol : ICMP if you could deny this do it for him it should help the timeouts

192.168.1.2
255.255.255.0
ports of the p2p

[Net knight]

thx for info i`ll try the SET 2 settings for now and test them On myslef
, But IF i used the SET 1 Without ports so it will slow down all that ICMPs out of his machine right???

cause i realy don`t care cause he insists to leave his downloads Unlimited!!! and the 4 of us suffering because of him


Also the one thats downloading much has a Wirless laptop that he uses through the router`s AP sometimes

[mccoffee]

yeah the icmp would just give your more pings that will help keep you connected. The higher speed package would really help 256 between 4 people it's kinda hard to spilt between three other people.

[Net knight]

it will be 512 >>> then 1 M.Bit in somedays so doesn`t matter if some 1 is stressed so others can use the connection

[Net knight]

Hi, I still can`t figure it out , I Attached an HTML copy of the DSl Routers Page for QOS with all its options please Check it out , and Try explaining it for me , or in other words answer these questions for me:

1- how can i limit the 192.168.1.2 PC from downloading and Damaging my online games and others who may use VOIP, Chat Programs, etc



2 - how can i prioritize my traffic so as to improve my ping times, knowing that today i tested the Ping use Cmd prompt Ping, found it ~130 , But Games was having Lagggs and Lock ups until i Manually stopped this guys (192.168.1.2) Connection!! everythinh Gone So Smooth!

Connection is 512 kb/s
Thx in advance
http://www.mediafire.com/?afl1x2kd0x1

[oronno]

Hi, i hope some one can help me out from this problem. I have high speed broadband. which is sharing between 3 persons. But i have found other two persons download big files from the net and i run out of download limits every month. I would like to install a client agent to other two pc and in my pc i would like to install a admin software so that i can monitor the incoming and outgoing traffic in MB or GB in daily or weekly or monthly basis. Does anybody knows any similar software which i can trace the bandwidth usuage for every single pc ? Please reply

[YeOldeStonecat]

Yup, first..what make/model router do you have?