Results 1 to 4 of 4

Thread: My ultimate performance settings?

  1. #1

    Talking My ultimate performance settings?

    Hey everyone... I'm new here, and first want to say wasssup!!

    Ok... I have a Proteva PC with a 500MHZ processor, 256mb RAM, Windows 98 SE, and use Internet Exploter 6 SP1.

    My Internet provider is JCN Internet in Missouri, and I have the "residential Basic" DSL package whick it claims a 384K download max...
    -------------------------------------------------------------------------------

    Here is my "ANALYZER" results... Can you tell me which settings would give me the best download speed?


    Here's a speed test I took also....


    2004-07-14 00:32:38 EST: 313 / 206
    Your download speed : 320828 bps, or 313 kbps.
    A 39.1 KB/sec transfer rate.
    Your upload speed : 211542 bps, or 206 kbps.



    (Analyzer Results)
    TCP properties for IP = 67.64.201.83 ()
    Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows 98; &id
    Notes: Read the Analyzer FAQ if the above is not your IP address.

    TCP options string = 020405b40103030301010402
    MTU = 1500
    MTU is fully optimized for broadband.
    MSS = 1460
    Maximum useful data in each packet = 1460, which equals MSS.

    Default Receive Window (RWIN) = 511104
    RWIN Scaling (RFC1323) = 3 bits (scale factor of 6)
    Unscaled Receive Window = 63888

    For optimum performance, consider changing RWIN to a multiple of MSS.
    Other values for RWIN that might work well with your current MTU/MSS:
    513920 (MSS x 44 * scale factor of 8)
    256960 (MSS x 44 * scale factor of 4)
    128480 (MSS x 44 * scale factor of 2)
    64240 (MSS x 44)
    bandwidth * delay product (Note this is not a speed test):

    Your RcvWindow limits you to: 20444.16 kbps (2555.52 KBytes/s) @ 200ms
    Your RcvWindow limits you to: 8177.664 kbps (1022.208 KBytes/s) @ 500ms
    MTU Discovery (RFC1191) = ON
    Time to live left = 56 hops

    TTL value is ok.
    Timestamps (RFC1323) = OFF
    Selective Acknowledgements (RFC2018) = ON
    IP type of service field (RFC1349) = 00000000

  2. #2
    fem the retarded rabbit mccoffee's Avatar
    Join Date
    Nov 2001
    Location
    Cleveland, Ohio, United States
    Posts
    13,379
    Your rwin is way way way way way to high man that is overkill on your connection try the following

    Try thease in the sg optmizer below me to download and install
    select - cable
    check - custom settings
    network adapter selection -
    check modify all adapters
    maxmtu -1500
    TTL - 64
    TCP Receive Window 64240
    MTU Discovery - yes
    Black Hole Detect - no
    Selective Acks - yes
    Max Dup ACKs - 2
    TCP 1323 nothing is checked
    Other Settings tab:
    Max Connections per Server - 10
    Max Connections per 1.0 Server - 20
    Lan Browsing Speedup - optimized
    Then select "Apply Changes" and reboot to take effect.

    1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

    2. Open IE and select tools - internet options - connections -
    LAN settings, make sure NOTHING there is checked.

    3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.

    4. Clear your temporary internet files.

    5. Power cycle your modem, unplug it for atleast 15 seconds.

    6. Download and update then do a scan with SpyBot 1.2 http://beam.to/spybotsd & Ad Aware 6.0 http://www.lavasoftusa.com/support/download to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.

    7. Make sure you do the faster web page tweak in Read1st link.

    8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.

    9. Install Outpost Firewall http://www.agnitum.com\ or Sygate Firewall http://www.sygate.com/ , both have FREE and Pro versions and are heads above ZA.

    10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 http://www.grisoft.com/us/us_dwnl_free.php is an excellent FREE AV app.

    11. Make sure you have ALL of the latest Windows Updates
    Comptia a+ n+

  3. #3

    Thumbs up

    Awesome!! Thanks for the help... My songs are downloading a lot smoother now, and quicker

  4. #4
    fem the retarded rabbit mccoffee's Avatar
    Join Date
    Nov 2001
    Location
    Cleveland, Ohio, United States
    Posts
    13,379
    glad it worked out
    Comptia a+ n+

Similar Threads

  1. GamePC:Working On A Budget : Webserver Performance Compared
    By YeOldeStonecat in forum Hardware & Overclocking
    Replies: 0
    Last Post: 03-04-04, 08:29 AM
  2. Anandtech article: "Mushkin PC4000 High Performance DDR500 Plus"
    By YeOldeStonecat in forum Hardware & Overclocking
    Replies: 1
    Last Post: 09-26-03, 03:32 PM
  3. Can cablenut settings..
    By Vif.com User in forum General Broadband Forum
    Replies: 0
    Last Post: 04-15-03, 06:41 PM
  4. CableNut settings?
    By Sag2734 in forum Broadband Tweaks Help
    Replies: 24
    Last Post: 10-24-01, 12:50 PM
  5. Help With Cable Settings?
    By Sting in forum Broadband Tweaks Help
    Replies: 19
    Last Post: 05-24-01, 06:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •