upload acting up ...

[techopsTM7]

Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows 98)
Notes: Read the Analyzer FAQ if the above is not your IP address.

TCP options string = 020405ac01010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.

Default Receive Window (RWIN) = 32768
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 32768

For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
63888 (MSS x 44)
bandwidth * delay product:

Your RcvWindow limits you to: 1310.72 kbps (163.84 KBytes/s) @ 200ms
Your RcvWindow limits you to: 524.288 kbps (65.536 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 51 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000

2003-07-10 19:24:25 EST: 1228 / 218
Your download speed : 1228984 bps, or 1228 kbps.
A 150 KB/sec transfer rate.
Your upload speed : 218102 bps, or 218 kbps.
Seems like broadband .. above the 1mbit barrier!

[techopsTM7]

after installing sg optimizer and set it up to optimal settings for DSL PPPoE, rebooted and here:::


TCP options string = 020405ac01010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.

Default Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 65535

Note: Under Windows 9x, if you have RWIN set to any other value, and the Analyzer reports 65535 you might need to install the MS Vtcp386 fix.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
63888 (MSS x 44)
bandwidth * delay product:

Your RcvWindow limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 51 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000

2003-07-10 19:30:07 EST: 1228 / 214
Your download speed : 1228984 bps, or 1228 kbps.
A 150 KB/sec transfer rate.
Your upload speed : 214132 bps, or 214 kbps.
Seems like broadband .. above the 1mbit barrier!

[mnosteele52]

Hi techopsTM7 , download CableNut from my signature and try the following settings:

BcastNameQueryCount - 1
BcastQueryTimeout - 100
BSDUrgent - 1
CacheTimeout - 600000
DefaultRecvWindow - 37960
DefaultTTL - 64
EnableDNS - 0
GlobalMaxTcpWindoSize - 37960
KeepAliveInterval - 500
KeepAliveTime - 14400000
Lanabase - 0
LocalCopyMade - 1
MaxConnections - 100
MaxConnectRetries - 5
MaxDataRetries - 64
NameTableSize - 255
NameSrvQueryTimeout - 100
PMTUBlackHoleDetect - 0
PMTUDiscovery - 1
RoutingBufSize - 146432
RoutingPackets - 100
SackOpts - 1
SessionKeepAlive - 7200
SessionTableSize - 255
Size/Small/Medium/Large - 3
Tcp1323Opts - 0
TcpTimedWaitDelay - 30
MaxDupAcks - 3
DefaultTOS - 90
IGMPLevel - 2
MaxConnectionsPer1_0Server - 20
MaxConnectionsPerServer - 10

VERY IMPORTANT TO DO THE FOLLOWING

1. Under your Configuration tab for your Network settings make sure you have only the needed protocols.

2. Install the vtcp 386 patch and the NDIS Update from here.

3. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

4. Make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.

5. Clear your temporary internet files.

6. Power cycle your modem, unplug it for atleast 15 seconds.

7. Download and update then do a scan with SpyBot 1.2 & Ad Aware 6.0 to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.

8. Make sure you do the faster web page tweak in my Help & Tips link.