tweaking cox cable [Archive] - SpeedGuide.net Broadband Community

View Full Version : tweaking cox cable


LuckIrv
10-10-02, 01:09 AM
Hi. I just moved into a new apartment and ordered cox cable at the advertised speed of 3000dl/256 ul. Im using windows 98 se .

This is the tcp/ip analyzer results.

Browser/OS = Mozilla/4.0 (compatible; MSIE 5.0; Windows 98) Opera 6.05 [en]
Note: Read the FAQ if the above is not your IP address.

TCP options string = 020405b401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.

Default Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 65535
Note: Under Windows 9x, if you have RWIN set to any other value, and the Analyzer reports 65535 you might need to install the MS Vtcp386 fix.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 28 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 01011100
Precedence (priority) = 010 (immediate)
Delay = 1 (low delay)
Throughput = 1 (high throughput)
Reliability = 1 (high reliability)
Cost = 0 (normal cost)




It reports my rwin at the 65535 no matter what i change it to. I also already installed the patch vtcp386. After testing my speed it varies greatly from time to time but usually its around 900kbps dl. Any help you can give me I will appreciate.
Thx.

mnosteele52
10-10-02, 05:34 PM
Welcome to Speedguide LuckIrv:D, download Cablenut from my signature and try the following settings:

BcastNameQueryCount - 1
BcastQueryTimeout - 100
BSDUrgent - 1
CacheTimeout - 600000
DefaultRecvWindow - 64240
DefaultTTL - 64
EnableDNS - 0
GlobalMaxTcpWindoSize - 64240
KeepAliveInterval - 500
KeepAliveTime - 14400000
Lanabase - 0
LocalCopyMade - 1
MaxConnections - 64
MaxConnectRetries - 5
MaxDataRetries - 64
NameTableSize - 255
NameSrvQueryTimeout - 100
PMTUBlackHoleDetect - 0
PMTUDiscovery - 1
RoutingBufSize - 146432
RoutingPackets - 100
SackOpts - 1
SessionKeepAlive - 7200
SessionTableSize - 255
Size/Small/Medium/Large - 3
Tcp1323Opts - 0
TcpTimedWaitDelay - 30
MaxDupAcks - 2
DefaultTOS - 92
IGMPLevel - 2
MaxConnectionsPer1_0Server - 20
MaxConnectionsPerServer - 10


64240 is about the perfect size RWIN for Cox, also do the following:

1. Under your LAN connection - properties - general tab, uninstall all the protocols there except TCP/IP Internet Protocol.

2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

3. Make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link (http://forums.speedguide.net/showthread.php?s=&threadid=85224)).

4. Clear your temporary internet files.

5. Power cycle your modem, unplug it for atleast 15 seconds.

6. Download and update then do a scan with Ad Aware (http://www.lavasoftusa.com).

:) :D

LuckIrv
10-10-02, 06:16 PM
Thx for the reply and help.
My performances are better now.