PDA

View Full Version : need help w/ wireless


RobotFighter
10-05-02, 06:39 PM
I had wireless internet installed a few days ago.I'm not all too sure it's up to speed though.Maybe you could help

1. ok done
2.wireless- uses WINxp PPPOE I think (I use Orinoco AS client 2.1.7 to log in)
3.Not all too sure bout this one either.It's sold as 11Mb wireless. www.fiac.net
4. see below
5. 664/213 (my upload showed ZERO 4 out of 10 times)
6.OS is Windows XP Pro

I aslo ran some tests from my isp's server they looked fine to me but other speed tests look slugish http://speed.fiac.net/ I avg about 300 there, even saw a 419 once. I'm also dling this 8.3 meg file in about 32 sec http://speed.fiac.net/2.zip

please help speeds look ok most times off my ISP's test sites but all other tests come out weak.




4.

TCP options string = 020405a00103030001010402

MTU = 1480
MTU is optimized for Windows XP PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.

MSS = 1440
Maximum useful data in each packet = 1440, which equals MSS.
MSS is optimized for Windows XP PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.

Default Receive Window (RWIN) = 24480
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 24480
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
506880 (MSS x 44 * scale factor of 8)
253440 (MSS x 44 * scale factor of 4)
126720 (MSS x 44 * scale factor of 2)
63360 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 979.2 kbps (122.4 KBytes/s) @ 200ms
Your RcvWindow limits you to: 391.68 kbps (48.96 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 111 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000