Scoring curiosity

[poptom]

My scores for the past couple of days have been less than expected so I was watching the screen when the last results were returned.
It showed that I was "anonymous, team 0" but the config file still showed the correct name and team.

Dunno what happened here so I deleted everything and reinstalled f@h3. Let's see if my scoring rate goes back up to what it was.

[Ken]

Pappa Tom, That is strange... I loaded the F@H3 client Wednesday and didn't have a bit of problem. It seems to be crediting me correctly. Our Team number is 15.

I hope that you have corrected the problem. :)

[LT-73]

oh no poptom ! Hope you got it straightened out :)

[poptom]

It's acting really strange now. Look at this:



# Windows Console Edition #####################################################
###############################################################################

Folding@Home Client Version 3.1

http://foldingathome.stanford.edu
email:help@foldingathome.stanford.edu

###############################################################################
###############################################################################

- Ask before connecting: No
- User name: poptom (Team 15)
- User ID = 2042110C2126BD91
- Machine ID #1

Benchmarking ...
Loaded queue successfully.

+ Processing work unit
Core required: FahCore_65.exe
+ Attempting to send results
- Connecting to server (171.64.122.117:8080)
(found)

[July 23 05:36:32] Working on Unit 09
+ Working ...
+ Network send failure
- Error: Could not transmit unit 08. Keeping unit in queue.
[05:36:32] Folding@Home Client Core Version 2.47 (June 14, 2002)
[05:36:32]
[05:36:32] Proj: work/wudata_09
[05:36:32] nsteps: 5000000 dt: 2.000000 dt_dump: 1000.000000 temperature: 300.000000
[05:36:32] xyzfile:
[05:36:32] " 201 p145_1L2Yunf
[05:36:32] 1 CH3 0.000000 0.000000 0.000000 7 2..."
[05:36:32] keyfile:
[05:36:32] "NOVERSION
[05:36:32] ARCHIVE
[05:36:32]
[05:36:32]
[05:36:32] printout 1000
[05:36:32] writeout 1000
[05:36:32]
[05:36:32] integrate ..."
[05:36:32]
[05:36:32] Hashes matched on file work/wudata_09.dyn
[05:36:33] - VerifyARCFile: ARC file size exceeds expected bound (40881 vs 27254)
[05:36:33] Starting from initial work packet
[05:36:33]
[05:36:33] Protein: p145_1L2Yunf
[05:36:33] - Run: 16 (Clone 84, Gen 0)
[05:36:33] - Frames Completed: 0, Remaining: 100
[05:36:33] - Dynamic steps required: 5000000
[05:36:33]
[05:36:33] Writing local files:
[05:36:33]
[05:36:33] parameters work/wudata_09.prm
[05:36:33] - Writing "work/wudata_09.key": (overwrite) successful.
[05:36:33] - Writing "work/wudata_09.xyz": (overwrite) successful.
[05:36:33] - Writing "work/wudata_09.prm": (overwrite) successful.
[05:36:35] - Writing "work/wudata_09.key": (append) successful.
[05:36:35]
[05:36:35] PROJECT="work/wudata_09", NSTEPS=5000000, DT=2.0000, DTDUMP=100.000000, TEMP=300.00
[05:36:36] TINKER: Software Tools for Molecular Design
[05:36:36] Version 3.8 October 2000
[05:36:36] Copyright (c) Jay William Ponder 1990-2000
[05:36:36] portions Copyright (c) Michael Shirts 2001
[05:36:36] portions Copyright (c) Vijay S Pande 2001
[05:50:00] ame (3)
[05:59:27] a frame (1)
[06:12:24] ame (4)
[06:22:14] a frame (2)
[06:34:49] ame (5)
[06:45:03] a frame (3)
[06:57:17] ame (6)
[07:07:41] a frame (4)
[07:19:44] ame (7)
[07:30:25] a frame (5)
[07:42:14] ame (8)
[07:53:06] a frame (6)
[08:04:50] ame (9)
[08:15:36] a frame (7)
[08:27:23] ame (10)
[08:38:19] a frame (8)
[08:49:49] rame (11)
[09:01:07] frame (9)
[09:12:21] frame (12)
[09:23:57] frame (10)
[09:34:50] frame (13)
[09:46:36] frame (11)
[09:57:12] frame (14)
[10:09:34] frame (12)
[10:19:31] frame (15)
[10:32:19] frame (13)
[10:42:05] frame (16)
[10:55:08] frame (14)
[11:04:28] frame (17)
[11:18:03] frame (15)
[11:26:47] frame (18)

+ Attempting to send results
- Connecting to server (171.64.122.117:8080)
+ Network send failure
- Error: Could not transmit unit 08. Keeping unit in queue.
[11:40:44] frame (16)
[11:49:16] frame (19)
[12:03:28] frame (17)
[12:11:47] frame (20)
[12:26:11] frame (18)
[12:34:13] frame (21)
[12:48:59] frame (19)
[12:56:33] frame (22)
[13:11:47] frame (20)
[13:19:04] frame (23)
[13:34:34] frame (21)
[13:41:38] frame (24)
[13:57:13] frame (22)
[14:04:08] frame (25)
[14:20:07] frame (23)
[14:26:28] frame (26)
[14:42:42] frame (24)
[14:48:50] frame (27)
[15:05:35] frame (25)
[15:11:26] frame (28)


I'm going to scrap it again and start over. It was working very nicely for about a week, sending results first as poptom, then as anonymous.

[iaus10]

Yesterday, I had a unit that transmitted after 34 frames. Then continued for the remaining 66 frames. It took a really long time to complete.

[poptom]

It tried to send again after 34 units but the comp was off-line. I stopped f@h after 37, connected, restarted f@h, and it sent queued results, then started again at 38.

Here is what I have now. I think I'll just let it play out but it's slow.



# Windows Console Edition #####################################################
###############################################################################

Folding@Home Client Version 3.1

http://foldingathome.stanford.edu
email:help@foldingathome.stanford.edu

###############################################################################
###############################################################################

- Ask before connecting: No
- User name: poptom (Team 15)
- User ID = 2042110C2126BD91
- Machine ID #1

Benchmarking ...
Loaded queue successfully.

+ Processing work unit
Core required: FahCore_65.exe
+ Attempting to send results
(found)
- Connecting to server (171.64.122.117:8080)

[July 23 18:39:29] Working on Unit 09
+ Working ...
[18:39:29] Folding@Home Client Core Version 2.47 (June 14, 2002)
[18:39:29]
[18:39:29] Proj: work/wudata_09
[18:39:29] nsteps: 5000000 dt: 2.000000 dt_dump: 1000.000000 temperature: 300.000000
[18:39:29] xyzfile:
[18:39:29] " 201 p145_1L2Yunf
[18:39:29] 1 CH3 0.000000 0.000000 0.000000 7 2..."
[18:39:29] keyfile:
[18:39:29] "NOVERSION
[18:39:29] ARCHIVE
[18:39:29]
[18:39:29]
[18:39:29] printout 1000
[18:39:29] writeout 1000
[18:39:29]
[18:39:29] integrate ..."
[18:39:29]
[18:39:29] Hashes matched on file work/wudata_09.dyn
[18:39:29] Header on frame 1 differs from expected header
[18:39:29] Got: 100092-54-3D3CE1DD-700FA929: 0001
[18:39:29] Expected: 100092-54-3D3CE1DD-700FA929: 0003
[18:39:29] Starting from initial work packet
[18:39:29]
[18:39:29] Protein: p145_1L2Yunf
[18:39:29] - Run: 16 (Clone 84, Gen 0)
[18:39:29] - Frames Completed: 0, Remaining: 100
[18:39:29] - Dynamic steps required: 5000000
[18:39:29]
[18:39:29] Writing local files:
[18:39:29]
[18:39:29] parameters work/wudata_09.prm
[18:39:29] - Writing "work/wudata_09.key": (overwrite) successful.
[18:39:29] - Writing "work/wudata_09.xyz": (overwrite) successful.
[18:39:30] - Writing "work/wudata_09.prm": (overwrite) successful.
[18:39:32] - Writing "work/wudata_09.key": (append) successful.
[18:39:32]
[18:39:32] PROJECT="work/wudata_09", NSTEPS=5000000, DT=2.0000, DTDUMP=100.000000, TEMP=300.00
[18:39:33] TINKER: Software Tools for Molecular Design
[18:39:33] Version 3.8 October 2000
[18:39:33] Copyright (c) Jay William Ponder 1990-2000
[18:39:33] portions Copyright (c) Michael Shirts 2001
[18:39:33] portions Copyright (c) Vijay S Pande 2001
+ Results successfully sent
+ Number of Units Completed: 8
[18:51:32] 24 N -6.546778 2.084047 12.915582 3 17 25 28

[18:51:32] 25 CH -6.419299 1.140888 14.008194 6 24 26 29

[18:51:32] 26 C -7.725607 1.198810 14.787097 1 25 27 42

[18:51:32] 27 O -8.319375 2.269093 14.898346 2 26

[18:51:32] 28 H -7.360928 2.673988 13.011653 4 24

[18:51:32] Finished a frame (38)

[poptom]

Man, it's slow. I hope it's for big points.

[LukeMan]

Yeah, they have some "ugly" WU's out there right now. I got a couple that are taking 25+ hours on the weaker machines.

Have you downloaded Electron Microscope? It will monitor your units and tell you "most" of the time the point value. You can get it HERE (http://home.attbi.com/~wxdude1/emsite/index.html). He also has a list of proteins and the values.

Just a heads up, there seems to be some question as to point value of that one. Folding has it's own forum it can be found HERE (http://home.attbi.com/~wxdude1/emsite/index.html)

Update.....heres another site (Stanford) that gives you point data

Here (http://folding.stanford.edu/psummary.html)

[poptom]

Thanks for the links, LukeMan. I'll check them out.

[poptom]

Well, I let it finish that one and it resulted in an error. It took 22 minutes per frame. I deleted everything and started again from scratch and it's OK now and has completed three WUs.

Everything is just hunky dory!