New Rwin Calculator

[BigAmp]

got the newest version of the RWIN Calculator up and running, there is a ton of improvments made to it so have a look.

some of the new stuff:
more MTU values
cut and paste
print
more RWIN values shown
basic and advanced modes

you can find the new version HERE (http://www.dslnuts.com/rwinbeta.shtml)

there is all so a link in my Signature

[dannjr]

So far so good for Beta :D

[Andrzej]

For long time I'm a peeper in this Forum.
Your RWIN Calculator is usefull and very fine pocket size tool.
Unfortunately I can not:
a. copy whole RWIN values windows with scale factors
b. add any words of comments
c. how often I change actual MTU?

For experiments (in series) I use apropriate matrix in Excel (easy: comments to numbers & record)

From my point it will be more usefull "pocet size RWIN calculator" BUT on OPOSITIVE direction.
It will be easier for me to analyse RWIN recomented by NAMES of the Forum.
Put values: RWIN and MSS (or MTU)
1.see factor of MSS [mf] it mean RWIN=(mf) * MSS
2.see scaling window [sw] and scale factor [sf] (or bit scale [bs]) RWIN=(sw)*(sf) respectively RWIN=(sw)*2^(bs)
3.my comments - a few words
4.date, results & comments coppy to clibord (on one line)

[dannjr]

Andrzej
It wasnt meant to be a DBase for analyzing by Forum

The Math for Rwin has a rule. Not based on a particular forum...

Not sure where your going with this.. Please try o be clearer on what you mean

[Andrzej]

I'm so sorry but I did not follow you.

I explain MY OWN opinion.
What I'm expect from tool "pocket size RWIN Calculator" ?

From known both: RWIN and MTU (or MSS) I want:

1. receive MSS factor [mf] (math notification see above)
2. but also obtain scale window [sw], bit scale and scale factor [sf] (math notification see above)
3. write a few words
4. add actual date to results, copy to clibord and from it to notepad (one line)

Please find below an example:
[b]23:43 02-06-22;1460mss;548960rwin;376mf;34310sw;16sf; 4bs;my acctual:D

[BigAmp]

I don't know if this would work for you at all but if you use the print option then you pinter should put the date on the sheet and all the other info is shown in the print out.

[Andrzej]

Thank you for advice.
You mean "print to file"?

I noted during years that I have reduced use of printer
- "from eco reason".
Only unnecesary reason - few sheet per week.
Most of electronic texts I can read and USE on screen.
The greater part PC documents I have ONLY in
electronic form.
Easier for: modification, record, coppy, sort, sent and find.
Unfortunately for me it is not posible to used it
(my laptop) on bath.:D

[hayc59]

what a Proggy!! love it!!
works great found my sweet spot!!
Thanks Amp!! and Dan:D

[BigAmp]

good point about the printer, I was just trying to hold you over till I could see about get changes like thayt made.

thanks for the feedback.

[Andrzej]

To the AUTHORE BigAmp
As you can see from the number of this tread readers
you have a BIG FANCLUB - including me.
Stil I remember the day when you first time show
RWIN Calculator
and how smart and fast improve it according to the needs.
I'M IMPRESSED BY YOUR WORK
Go ahead!
:D
BTW My perssonal LAMER advice to you.
If I'm the only person in universum with such strange expectation?
Go ahead - do not lose your time!!.

[BigAmp]

dose anyone else have any feedback about the Calculator???

[BigAmp]

there is over two hundred fifty views and there is this little feedback I don't know if this is really good or really bad:( :( :(

[Lobo]

Latency:)

[Andrzej]

I stand by Lobo :D

[BigAmp]

OK where is a good demo of the math for Latency?

[Lobo]

Big Amp, Cablenut and Dannjr already have one with latency in it:)

[BigAmp]

OK the next version of the RWIN Calculator is well under way and should be out some time soon, so if you want any thing else to be there say something now or vary soon... or else....



your just going to have to wait untill the next verson is out after that!

[Andrzej]

I'm waiting

[BigAmp]

ha ha :D :D :D :D

[Andrzej]

yours faithful consumer :2cool: