What should my RWIN be set at?

[ChrisZ24]

TCP options string = 020405b40103030001010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.

Default Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 65535
Note: Under Windows 9x, if you have RWIN set to any other value, and the Analyzer reports 65535 you might need to install the MS Vtcp386 fix.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 51 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000


Chris

[ChrisZ24]

According to dslr.net (i know there is bad blood between the 2 sites) they recommend i use one betweet 14600 and 37960?

http://monitor.dslreports.com/tweak/block:414eb4f?service=cable&speed=1500&os=win98&via=normal

Chris

[mnosteele52]

Please post this over in the Tweaking forum.:) If you answer a few questions it will be easier to help you. Who is your ISP? What are your caps from them? What kind of speeds are you getting with the settings you have posted? What OS? and What type of connection is it?

P.S. Please read "My Tips" in my sig and find one of Lobo's threads (not hard to find):D and read his "Help Thread".

Good luck and please post back.:) :D :)