try this

[Travlin_Man]

Try this it might help... I know it does with my xp.

Got it out of LOBO's xptweaks.

http://forums.speedguide.net/showthread.php?s=&threadid=54426 (http://)

Let me know...


4.) Disable IDE Port Scanning on empty ports and save bootup time.
Go to System Properties by right-clicking on My Computer or via the Control Panel.
Select the Hardware tab.
Look at the Device Manager section and click on the Device Manager button.
This brings up the Device Manager screen.
Open up the IDE ATA/ATAPI controllers device branch. Then you will see a list of all the IDE controllers

and channels in your system.
Now, select any one of the IDE channels, right click and choose Properties. Or just double click on the

IDE channel.
Now, select the Advanced Settings tab to get the screen below. As you can see below,

the second port (Device 1) on the Primary IDE Channel does not any IDE device attached to it.

Thus, the Device Type is labeled as Auto Detection. In contrast, the first port has a device attached. That's why the Device Type is grayed out.
To disable IDE device scanning for the second port, click on Auto Detection and you will see

two choices on the list. Select None.
Click OK and reboot. Windows 2000 will now refrain from scanning that IDE port at start up and

should load a little faster