lobo or halflifer [Archive] - SpeedGuide.net Broadband Community

View Full Version : lobo or halflifer


battman
11-25-01, 11:05 PM
I have installed cable nuts and also have installed SG patches..

win me
500 mh
10 g
312 ram
cable RR
IE 6


concerned about defrecwindows # dont seem right
I ALSO KNOW I HAVE NO PACKET LOSS IF IT MATTERS

Thanks for anyhelp you can give...

Test running..........
** Speed 1547(down)/283(up) kbps **
(At least 30 times faster than a 56k modem)
Finish.

TCP options string = 020405b401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.

Default Receive Window (RWIN) = 17520
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 17520
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 700.8 kbps (87.6 KBytes/s) @ 200ms
Your RcvWindow limits you to: 280.32 kbps (35.04 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.

MTU Discovery (RFC1191) = ON

Time to live left = 112 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

funky
11-26-01, 12:42 AM
Install SG tweaks again and reboot. Install cablenut after SG tweaks can make your life miserable. Not really, but it will delete the SG tweaks.

ChuckDees
11-26-01, 01:41 AM
Looks pretty good to me.

earthmofo
11-26-01, 08:54 AM
Eugene is right. Installing CableNut will remove all prior registry tweaks. You will have to re-install the SG patch.