lobo plz read

[LBP WANNA BE]

ok i see that ur a good person to ask so here it is... I play counter-strike and i got DSl my ping is like 180's-200's it doesnt seem bad but it is unbearadble lag can u help me plz

TCP options string = 020405b0010303010101080a000000000000000001010402

MTU = 1496
MTU is fully optimized for broadband.

MSS = 1456
Maximum useful data in each packet = 1444, which is less than MSS because of Timestamps, or other TCP/IP options used.

Default Receive Window (RWIN) = 104832
RWIN Scaling (RFC1323) = 1 bits
Unscaled Receive Window = 52416
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
512512 (MSS x 44 * scale factor of 8)
256256 (MSS x 44 * scale factor of 4)
128128 (MSS x 44 * scale factor of 2)
64064 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 4193.28 kbps (524.16 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1677.312 kbps (209.664 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 19 hops
TTL value is ok.

Timestamps (RFC1323) = ON
Note: Timestamps add 12 bytes to the TCP header of each packet, reducing the space available for useful data.

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

[Lobo]

Set Tcp1323Opts to 1 to turn off timestamps and try RWIN's 31944 or 63888:)

[LBP WANNA BE]

lobo thanks but can u put it in stupid newbie language cause its my first time doing this:eek:

[funky]

Download Cablenut Adjuster from my sig below. Install, reboot, open that bad boy, find TCP1323Opts, there should be a 2 or 3 there, change it to one. find TCPWindowsize if you are on 9x and TCPWindowSize, MaxGlobalTCPWindowSize, and DefaultRcvWindows if your Window is more updated, and put one of the number that Lobo suggested in. Click on Save Registry below, reboot, and see if it helps. read through the Help thread also below to see how to do speedtests.:)

[LBP WANNA BE]

ok i tried and i still didnt understand can one of u guys walk me throught it? e-mail me plz pycho13@hotmail.com


:confused:

[LBP WANNA BE]

lobo i kinda wanted the e-mail from u but if u cant send me one post it step by step plz ive all ready changed that one value to 1
and my ping is a little better like 170's

plz post how do do it step by step plz

[funky]

Did you install the SG patches for PPPoE?

[NotFastEnough]

Ummm... isn't it LPB... as in Low Ping B*itch or Low Ping B*stard?

What is an LBP?

:rotfl:

[Lobo]

What OS are you on and are you on PPPoE:




PPPoE you have to log on to the internet with username and password. (Not log on to Windows)
PPPoE ( Point-to-Point Protocol over Ethernet ) is a method for building PPP sessions and encapsulating packets, as described in RFC2516. Although it is not a standard, PPPoE is already being used by a number of DSL providers. It requires either routers that have built-in PPPoE support, or PPPoE software to "dial up" and establish the session. You have to log on with name and password everytime you access net with PPPoE.
:)

[LBP WANNA BE]

no i dont have to log on the inernet so what should i download,and lobo those Rwin numbers or what ever u call them made my ping higher also i got windows ME

[Lobo]

Start over, uninstall Cablenut, then reinstall it, no ccs file, rerun SG's patches and take analyzer test and post results, tell me CPU size and amount of RAM:)

[Mudmen]

LPB you idiot! I RULE AT CS last score 47-4!!!! and i am not a cheater!

[Lobo]

He's not a idiot, but I know who is:)

[Mudmen]

im stoned im not an idiot!

[LBP WANNA BE]

ok lobo i didnt get any sg patches so i need it step by step and ill give u my specs 63.0MB RAM and i cant find the CPU size.................................ok now that your done laughing plz post what to d/l besides cabelnut and tell me what to set all the settings and by the way i dont know if i can say this but Mudmen why don't u go play hide and go F*** yourself;)

[funky]

http://www.eng.buffalo.edu/UBiquity/Software/Microsoft/WINNT/

We need to know the OS you are using too.

[Lobo]

Not flaming, Crispy, you get me confused, links to 9x and W2k adjuster's in help thread:

TCPWindowsize if you are on 9x and TCPWindowSize, MaxGlobalTCPWindowSize, and DefaultRcvWindows if your Window is more updated, and put one of the number that Lobo suggested in. Click on Save Registry below, reboot, and see if it helps. read through the Help thread also below to see how to do speedtests.


Their is no TCP Window size in a 9x adjuster,lol
:)

[LBP WANNA BE]

crispy thx but u get me confused so lobo can u tell me what to do

[Lobo]

What OS are you on and I will tell you what patches, CPU Size, go to My Computer, RIGHT click, select properties, it will tell you their:)

[Mudmen]

GEEEEEK!

[Lobo]

Sticks and stones, good college football today and boxing tonight, whats a GEEEEEEEEK, me NERD!!!!!!!!!!!!!!!!!, lol, jk:) :)

[Mudmen]

im gunna go get high

[Mudmen]

and your cable modem tweaks didnt work with me! i cant figure it out

[Lobo]

Maybe you were high,lol:)

[Lobo]

Click on help thread below in signature and follow directions exactly, please leave your OS and system specs if you have not done so.Also if you have Cablenuts adjuster installed I need to know that. There are some Tips and how to do speed test on help thread. Thank you and good luck. Please do this AFTER you install patches:

Please click in my signature where it says Test tweak here, then:
At top where it says edit click and select, Select all,
Then go back to same edit button at top, click and select copy.
Come back to Speedguide, same thread you were on, in post reply box, with cursor blinking at begining of box go to top, edit, click, select paste, click, this will put information in box. Please X out your IP address, Thank you.
:)

[LBP WANNA BE]

i have windows ME,and i still cant find the PC speed if it helps it says i got an intel celeron processor

[Lobo]

Are you on cable:)

[Mudmen]

MainCable ModemsDiscussionWindows 9xReviewsEditorialsInformationTweaks & PatchesSG TCP/IP AnalyzerSetting up a LANSecurityBits and BytesInteresting StoriesAutologin with RRCable/DSL FAQTerms & DefinitionsCable / DSL Links">">">">">">">">">
Mon Nov 05 09:37:54 2001.



SpeedGuide.net TCP/IP Analyzer
Note: Read the FAQ if the above is not your IP address.
Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)

TCP options string = 020405b40103030401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.

Default Receive Window (RWIN) = 560640
RWIN Scaling (RFC1323) = 4 bits
Unscaled Receive Window = 35040
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 22425.6 kbps (2803.2 KBytes/s) @ 200ms
Your RcvWindow limits you to: 8970.24 kbps (1121.28 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 53 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000




21198 connections tested since 03.10.2001.
Analyzer version: Beta 0.99

Win XP
256RAM
1GHZ
Had a G3 but when i was stoned i dropped a screw on it and it got fried! hopefully i can get it refunded! and i already have cablenut

[Lobo]

You dont have NIC set to full duplex do you, set to half or auto, auto sense, hardware default or 10baseT or see hare (http://homepage.ntlworld.com/robin.d.h.walker/cmtips.html) :)

[Mudmen]

how do i set them to half or auto or whatever

[Lobo]

Network connections in control panel, properties, configure, advanced tab at top, media something:)

[Mudmen]

resart?

[Mudmen]

what now? i need the NIC buffer tweaks i lost em

[Mudmen]

im at 50x 56k now. this sucks i am to ignorent to tweak.

[LBP WANNA BE]

lobo can u help me the person who u were orignaly suposed to help i d/l the patch how do i install it and what do i make each setting

[funky]

http://forums.speedguide.net/showthread.php?s=&threadid=49848&highlight=Buffer+tweaks

NIC buffer tweaks.

LBP, unzip/merge the SG tweaks and reboot. take test and show results.

[Mudmen]

MainCable ModemsDiscussionWindows 9xReviewsEditorialsInformation">">">">">">">">">">">">">">">">">">">
Mon Nov 05 22:13:46 2001.



SpeedGuide.net TCP/IP Analyzer
Note: Read the FAQ if the above is not your IP address.
Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)

TCP options string = 020405b401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.

Default Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 65535
Note: Under Windows 9x, if you have RWIN set to any other value, and the Analyzer reports 65535 you might need to install the MS Vtcp386 fix.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 37 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000




29961 connections tested since 03.10.2001.
Analyzer version: Beta 0.99

[funky]

Open Cablenut, put 1 in TCP1323Opts, save registry, reboot.:)

[Lobo]

He must not have SG's patch loaded now as SG's put's a 1 there, so he's loaded a ccs file and now is going to put larger RWIN in, read help thread below in sig:)

[LBP WANNA BE]

canu guys plz hep me cause it seems like ur focusing on him and i need help bad aslo crispy in ur help post my cabel nut does not have some of those slots

[Mudmen]

shutup cry baby

[Lobo]

i put it at 100Mbps/Half Duplex , should be 10 :)

[Mudmen]

10 Halfduplex or full? i have a 100Mbps card if that matters. o im an idiot, i just want some pot im all out

[Lobo]

10 Halfduplex :)

[Mudmen]

what if i put it 100Mbps Half duplex? and i cant seem to get any of these tweaks to work. . . . it is probably my fault but i cant get back the 110x 56k anymore since i got XP! i cant figure this **** out, its making me go crazy! i tried everything you said and it still doesnt work. excuse me while i seriously YELL! AHHHHHHHHHHHHHHHH MOTHER ****ER I CANT STAND THI **** I DONT WANT TO LIVE **** SUCK IT DAMN CRAP!------------------------------------- alright im done sorry

[Lobo]

Please click in my signature where it says Test tweak here, then:
At top where it says edit click and select, Select all,
Then go back to same edit button at top, click and select copy.
Come back to Speedguide, same thread you were on, in post reply box, with cursor blinking at begining of box go to top, edit, click, select paste, click, this will put information in box. Please X out your IP address, Thank you.:)

[Mudmen]

MainCable ModemsDiscussionWindows 9xReviewsEditorialsInformationTweaks & PatchesSG TCP/IP AnalyzerSetting up a LANSecurityBits and BytesInteresting StoriesAutologin with RRCable/DSL FAQTerms & DefinitionsCable / DSL Links">">">">">">">">">
Wed Nov 07 06:11:08 2001.



SpeedGuide.net TCP/IP Analyzer
Note: Read the FAQ if the above is not your IP address.
Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)

TCP options string = 020405b40103030401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.

Default Receive Window (RWIN) = 554800
RWIN Scaling (RFC1323) = 4 bits
Unscaled Receive Window = 34675
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 22192 kbps (2774 KBytes/s) @ 200ms
Your RcvWindow limits you to: 8876.8 kbps (1109.6 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 53 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000




1554 connections tested since 03.10.2001.
Analyzer version: Beta 0.99

[Mudmen]

my transfer effiency is only 86% to, it used to be 100%. tested from www.dslreports.com/tweaks

[LBP WANNA BE]

mudemem u should shut up ur probly just a little whiney 13 yr. old girl

[Lobo]

hehehehehehe,lol:rotfl: :rotfl: :rotfl: :rotfl:

[Mudmen]

15yr old boy. and you guys dont know how to tweak for ****!

[Lobo]

Well smarty, stay there at dslr and take test after test, different each time:)

[LBP WANNA BE]

ok lobo can u help me NOW PLZ i have WINDOWS ME AND I NEED HELP

[Lobo]

Whats wrong:



Please click in my signature where it says Test tweak here, then:
At top where it says edit click and select, Select all,
Then go back to same edit button at top, click and select copy.
Come back to Speedguide, same thread you were on, in post reply box, with cursor blinking at begining of box go to top, edit, click, select paste, click, this will put information in box. Please X out your IP address, Thank you.:)Start new thread