PPPoe Question..

[kulitxkulot]

how do i know if i have PPPoe??? I have Verizon DSL 768up/121down...

[kulitxkulot]

Ok...ive gotten help from u guys before about the cablenut thingy..but it changed from the last time i dled it. I reformatted my comp so im starting new. Does it cablenut work for DSL thats not PPPoe??? If so...wat values do i put in it and which of the ccs file do i use??

Specs: 1.2 AMD Athlon, 512 pc133, win2k

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.

Default Receive Window (RWIN) = 17520
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 17520
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 700.8 kbps (87.6 KBytes/s) @ 200ms
Your RcvWindow limits you to: 280.32 kbps (35.04 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.

MTU Discovery (RFC1191) = ON

Time to live left = 112 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

[Lobo]

Your not on PPPoE with MTU of 1500, try RWIN of 64240 in woever's speed patch you install:)