Twecking with @home

[Zeler]

Hello I just got my cable modem yesterday its an rca, my speed changes alot from 800 to 100. Is there anything i can do to my settings to get me some more speed here are my settings

TCP options string = 020405b4

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.

Default Receive Window (RWIN) = 49152
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 49152
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 1966.08 kbps (245.76 KBytes/s) @ 200ms
Your RcvWindow limits you to: 786.432 kbps (98.304 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = OFF

Time to live left = 46 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = OFF

IP type of service field (RFC1349)= 00000000

[Lobo]

See below in help thread how to turn off proxy:)

[Zeler]

lobo i read the part about turning them off but when i typed in what it told me to do it sayed no dll specified

also. i ran the test at the bottom of u post and i already posted the settings but some are diffrent then what a program i have on my computer says. the program is called broadband wizard it it tells me

mtu=7500
rwin=59680

is this normal?

[Lobo]

No it's not but if you do not have @home software on your computer, you were not supposed to type that, just do the rest of what it said, also go to help thread below and start over, follow directions.:)