so any other good testing sites?

[crazyman]

I have used "shields up" and "dsl reports" to test my ports and security.any other better sites for that????

[blebs]

Hey Crazyman, try this one out. Go for the full scan which will require you to leave your puter on and will get the results back in email. It takes about 1 to 2 hours for the complete scan.

Port Scan (http://www.sdesign.com/securitytest/index.html) :D

TheCroc had a good test site posted awhile back and I can't find it now. If you want to leave him a message in PM or something, you might want to try his tests.

[Matt615]

OK here are two others I have

http://scan.sygatetech.com/

www.hackerwhacker.com

[emixnem]

Originally posted by blebs99
Hey Crazyman, try this one out. Go for the full scan which will require you to leave your puter on and will get the results back in email. It takes about 1 to 2 hours for the complete scan.

Port Scan (http://www.sdesign.com/securitytest/index.html) :D

TheCroc had a good test site posted awhile back and I can't find it now. If you want to leave him a message in PM or something, you might want to try his tests.

god dang!! 2 hrs??
is it free ?

[blebs]

Originally posted by emixnem


god dang!! 2 hrs??
is it free ?

Yeap, it's free, but you have to submit your email address or you won't get a report back. That is the longest it took to scan mine. Sometimes it can get you all scanned in 1 hour or less, just depends on traffic at testing time.:)

[Marine06]

Vulnerabilities.org (http://vulnerabilities.org) is an awesome scanner that actually uses NMAP to scan a remote computer. It's free and they report their results via email.

[emixnem]

Originally posted by blebs99


Yeap, it's free, but you have to submit your email address or you won't get a report back. That is the longest it took to scan mine. Sometimes it can get you all scanned in 1 hour or less, just depends on traffic at testing time.:)

ok i did mine and took about 76 min..
neways, here's my results
and blebs99...are this results good ???
reply plez!!!!

Port Scanning Results
The Port Scan security test you requested was completed for your computer at IP: **.**.**.** This test was done by attempting to establish a connection to a list of known ports as well as all system ports below number 1024 on your computer. The report set forth below shows all the ports on your computer that are open and may accept connections from anyone on the internet.
--------------------------------------------------------------------------------
Windows file sharing information
This computer did not respond to a netbios name query.
Windows filesharing summary: Your compter appears secure from Windows filesharing attacks because your computer will not respond to any queries about Windows file sharing. Compared to average Windows computers, this is very good!
--------------------------------------------------------------------------------
Scanning host adsl-**-***-**-**.dsl.renocs.nvbell.net at IP: **.***.**.**
Port Protocol Service Status Comments

--------------------------------------------------------------------------------
Port scan completed in 76 minutes, 53 seconds.

What's Next? Now that you know which ports are open on your computer, you should read the Scanning Results page for more information on how to secure your computer, or return to the index page.
--------------------------------------------------------------------------------

[blebs]

Looks like a perfect score! Good Job.:D

[emixnem]

Originally posted by blebs99
Looks like a perfect score! Good Job.:D

kewl

[blebs]

emixnem: You may want to try some of the other test sites as well, though I don't think your going to see any different results.
It's just always good to get a second, third, etc, opinion from different places. Just be sure to check the sites privacy policy as Ken said.:)

[emixnem]

Originally posted by blebs99
emixnem: You may want to try some of the other test sites as well, though I don't think your going to see any different results.
It's just always good to get a second, third, etc, opinion from different places. Just be sure to check the sites privacy policy as Ken said.:)


hey blebs
i went on this test site http://www.mycgiserver.com/~kalish/
and everything was stealth, except for
Attempting connection with your port 113.
TCP connection is refused.
how do i stealth that???

[crazyman]

thanks for all the replies..........

[Bad_Boy_Aus]

HeY wHaTsUp Everyone

1st of all i just whanto say that its eople ike those that have posted here any many more that keep this sight up and running and brings mutch knowledge to homes and buissnesses around the world...its great KEEP IT UP GUYS i allmost forgot and the GIRLS

i have visited a few sights mentioned in some of the posts and i am generally overaLL quite happy with the results though 1 security scan by a web sight might say something and another security scan BY ANOTHER WEB SIGHT MAY SAYSOMETHING ELSE
in all my scans i had PORT=139=OPEN
PORT=21=OPEN
and a few others
now i know that these are quite important and vaunrable ports...
is there anyone out there who has knowledge of a program whitch can moniter or close these ports..>?:2cool:

[Storm90]

As blebbs posted about Portscan . It is a good site. just use it during less busy times and you can get it back in less then a hour. Plus it does a great job. Better then some of them . Does all ports not just the highest for being traced by hackers. :) :) ;)

[smilingtooo]

Originally posted by Bad_Boy_Aus ....in all my scans i had PORT=139=OPEN PORT=21=OPEN
and a few others now i know that these are quite important and vaunrable ports...
is there anyone out there who has knowledge of a program whitch can moniter or close these ports

Bad_Boy_Aus - These may help answer your inquiry.

For PORT= 139 info - check this site - http://www.infowar.com/hacker/00/hack_060500a_j.shtml

For PORT= 21 info - check this site - http://www.dshield.org/ports/port21.html

[Storm90]

The one port 21 is for ftp and the other lets all the net see your files. Are you running a good firewall. Plus if you are not networking make sure you remove Client forMIcrosoft Network form the control Panel Under Network Icon and File and printer shareing for Client for Microsoft network. These two only. They will disable Port 137. Then choose agood firewall such as Zonealarm at www.zonelabs.com Or Tinypersonal firewall from www.tinysoftware.com . Tiny is harder to configure you might want to go with zonealarm. If you are running a router you might want to shut these port threw it. Another program I can think of it PortBlocker from www.analogx.com This is not a firewall but will let you block or open ports. Hope this helps you out. GoodLuck!;)

[MrTRiX]

I find the best way is to download a port scanner and usuing another computer say a friends or another one you have scan yourself with it on both UDP and TCP. You can also do other test and they are more controled because you cans top them at anytime.