View Full Version : Speed up internet
What do i have to do if i want to speed up my internet speed. i am using Bell Sympatico HSE and win ME.
This is my result i get at www.dslreports.com/tweaks (http://www.dslreports.com/tweaks)
* Your RWIN reads as 40960
* Some tests failed.
* Turn Path MTU Discovery ON
* Recommendations end.
TCPopts hex string is 0204058601010402
Max Segment Size is 1414
* Your MTU is set ok
SACK Permitted (RFC2018)
Ping stability 94 95 95 98 96 96 93 95 94 96
* You are 14 hops away
* Your remaining TTL is 115
* Your TTL is 129
* Quick packet-loss tested ok
DefaultRcvWindow (RWIN) is 40960
Your RWIN limits you @95.2ms to 3442kbps
Your RWIN limits you @200ms to 1638kbps
* Your RWIN is set ok at 40960
* Path MTU Discovery is OFF
* TOS octet is 00000000 on data packets
* RWIN on data packet is 65535
Max packet from you 576 bytes
(Which is less than your advertised MSS)
Please read this thread. http://forums.speedguide.net/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=14&t=000109
Then do a test from here and post the results. Have you added any patches?
Doesn't look like any patch is installed. You can get them from here after reading the above thread. You are ADSL connected are you not? http://www.speedguide.net/Cable_modems/cable_patches.shtml
[ 03-15-2001: Message edited by: blebs99 ]
i am using DRTCP019 should i change to MAX MTU on the site u give me before i do the test? http://forums.speedguide.net/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=14&t=000109
Are you a DSL PPPoE connection? By the way, Welcome to Speedguide! :)
i don't really know what is a DSL PPPoE connection.
And what patch should i use?
[ 03-15-2001: Message edited by: abc ]
Digital Subscriber line from your phone company and point to point protocol over ethernet. In other words your not connected by your cable company.
ok. Then what should i do
Before I get you all confused here, you should check with your ISP to see if they implement the PPPoE protocol or not. If I get you to install the wrong patch, things aren't going to work out properly! I'm not a DSL person myself but I think I can help you out, if not, someone who is DSL familiar, such as dannjr or a couple others will pick up on this thread. I just don't want to have you install the wrong patch! ;)
i have ask someone and i have it what should i do next?
First of all, make a back up copy of your current registry. Go to Start/Run/ Type in regedit, then go to the top of the open box and click on Registry, then export registry file, save it to a location easy for you to find, give it a name such as Reg031401, this way you'll have dated working registry to go back to if something should go wrong. Once you've backed up and stored a copy of your current registry, then go to the patches page and download the Sguide_tweak_98_me_PPPoE patch. Extract the patch and right click on it and choose install from the menu. Reboot for the changes to take effect. After you've done all this, go to the test and post a copy of your test. Be sure to block out your IP address so no one else can see it. Then we'll go from there! :)
Ya do this test instead it will show some stuff that DSLR won't...
Your doin fine with this my eyes hurt for all I know after that big one I just posted I'll give out a instructions for rebuilding a cylinder block
dannjr: You know, sometimes I think it would be easier to give directions on rebuilding cylinder blocks!
I know what you mean about the eyes. I'm sitting here with the flu and wondering if I'm just talking jiberish or if someone can actually understand me. hehe :D
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.