ss8wjl@ast.lmco.com
04-12-08, 03:06 AM
Sorry for the delay in answering.
I downloaded the latest firmware. And the hardware version is v8.2.
It still won't shutdown properly with the ethernet hooked up to the
router, but if I unplug the ethernet prior to shutting down (i.e., I'm
using the wireless-g connection only to the linksys router), it shuts
down fine.
Any ideas?
On Mar 30, 3:22*am, Barb Bowman <b...@nospam.com> wrote:
> do you have the latest firmware for the router? what hardware
> version WRT54G?
>
>
>
>
>
> On Sat, 29 Mar 2008 23:42:54 -0700 (PDT), ss8...@ast.lmco.com wrote:
> >Hello all:
>
> >I recently successfully set-up aLinksysWRT54g Wireless-G router with
> >4-ethernet wired ports. Currently, I only have one computer, and when
> >it is in the office with the router, I have the ethernet wired
> >connection hooked up on the computer and the wireless connection is
> >also active (although I think I've learned that the wired connection
> >will become the "preferred" connection when both are present).
>
> >Everything is working great, with one exception. Ever since I
> >completed this set-up, my Dell Inspiron E1705 withVistahangs during
> >shutdown. The "Shutting Down" screen never goes off. This only occurs
> >if I have the Ethernet cable plugged into the computer when I shut
> >down. If I unplug the Ethernet cable prior toshutdown, everything
> >works fine. But, if Ishutdownwith the Ethernet cable plugged in
> >(whether or not the WiFi connection is active), it will hang and will
> >not continue even if I later disconnect the ethernet cable.
>
> >I never had thisshutdownproblem when I was directly connected to my
> >Comcast cable modem via ethernet. But, now that I'm going through the
> >Linksysrouter, I seem to have a problem.
>
> >FYI, I also have the McAfee security suite that Comcast provides
> >installed on the computer, in case that could be related (I always
> >suspect virus and firewall software for problems like this).
>
> >Can anyone point me in the right direction to debug this situation.
> >I'm not very literate in the ways of networks.
>
> >Thanks,
>
> >BillL
>
> --
>
> Barb Bowman
> MS-MVPhttp://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspxhttp://blogs.digitalmediaphile.com/barb/- Hide quoted text -
>
> - Show quoted text -
I downloaded the latest firmware. And the hardware version is v8.2.
It still won't shutdown properly with the ethernet hooked up to the
router, but if I unplug the ethernet prior to shutting down (i.e., I'm
using the wireless-g connection only to the linksys router), it shuts
down fine.
Any ideas?
On Mar 30, 3:22*am, Barb Bowman <b...@nospam.com> wrote:
> do you have the latest firmware for the router? what hardware
> version WRT54G?
>
>
>
>
>
> On Sat, 29 Mar 2008 23:42:54 -0700 (PDT), ss8...@ast.lmco.com wrote:
> >Hello all:
>
> >I recently successfully set-up aLinksysWRT54g Wireless-G router with
> >4-ethernet wired ports. Currently, I only have one computer, and when
> >it is in the office with the router, I have the ethernet wired
> >connection hooked up on the computer and the wireless connection is
> >also active (although I think I've learned that the wired connection
> >will become the "preferred" connection when both are present).
>
> >Everything is working great, with one exception. Ever since I
> >completed this set-up, my Dell Inspiron E1705 withVistahangs during
> >shutdown. The "Shutting Down" screen never goes off. This only occurs
> >if I have the Ethernet cable plugged into the computer when I shut
> >down. If I unplug the Ethernet cable prior toshutdown, everything
> >works fine. But, if Ishutdownwith the Ethernet cable plugged in
> >(whether or not the WiFi connection is active), it will hang and will
> >not continue even if I later disconnect the ethernet cable.
>
> >I never had thisshutdownproblem when I was directly connected to my
> >Comcast cable modem via ethernet. But, now that I'm going through the
> >Linksysrouter, I seem to have a problem.
>
> >FYI, I also have the McAfee security suite that Comcast provides
> >installed on the computer, in case that could be related (I always
> >suspect virus and firewall software for problems like this).
>
> >Can anyone point me in the right direction to debug this situation.
> >I'm not very literate in the ways of networks.
>
> >Thanks,
>
> >BillL
>
> --
>
> Barb Bowman
> MS-MVPhttp://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspxhttp://blogs.digitalmediaphile.com/barb/- Hide quoted text -
>
> - Show quoted text -