[HELP] Globelines DSL 2mb

[frOst_EntAngLE]

I recently applied and got connected to my ISP GLobeLines DSL, 2mb connection. I pay P1,995 per month for this one, but it seems the connection is not worthit for what i pay.Im located at Philippines.

Can someone help me here?

Here is my test results:

« SpeedGuide.net TCP Analyzer Results »
Tested on: 02.24.2009 08:41
IP address: 120.28.xxx.xx
Client OS: Windows XP

TCP options string: 0204058201010402
MSS: 1410
MTU: 1450
TCP Window: 65535 (NOT multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 65535
Recommended RWINs: 64860, 129720, 259440, 518880, 1037760
BDP limit (200ms): 2621kbps (328KBytes/s)
BDP limit (500ms): 1049kbps (131KBytes/s)
MTU Discovery: ON
TTL: 105
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

[Rollingstone]

The MTU for Globe is 1492. Log into your modem/router and set MTU to 1492, MSS 1452 (if any), then save and reboot. After that, post your new TCP Analyzer Report.

[frOst_EntAngLE]

The MTU for Globe is 1492. Log into your modem/router and set MTU to 1492, MSS 1452 (if any), then save and reboot. After that, post your new TCP Analyzer Report.

Thanks for your reply Rollingstone.
Ive changed the MTU setting using TCPoptimizer.I dont find any MSS though.
Here is the new report:

« SpeedGuide.net TCP Analyzer Results »
Tested on: 02.26.2009 08:32
IP address: 120.28.xxx.xxx
Client OS: Windows XP

TCP options string: 020405820103030401010402
MSS: 1410
MTU: 1450
TCP Window: 1046208 (NOT multiple of MSS)
RWIN Scaling: 4 bits (2^4=16)
Unscaled RWIN : 65388
Recommended RWINs: 64860, 129720, 259440, 518880, 1037760
BDP limit (200ms): 41848kbps (5231KBytes/s)
BDP limit (500ms): 16739kbps (2092KBytes/s)
MTU Discovery: ON
TTL: 105
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

seems like it looks right?
is this good enough?
does it help if i change the DNS?

[frOst_EntAngLE]

-------------

i just realized the MTU is still at 1450.
ive changed the MTU using TCPoptimizer but still its still 1450 registered on the report.

i think we have the same problem with this:
http://forums.speedguide.net/showthread.php?t=250357

i will try to contact my provider and see if they can raise my MTU to 1492.
my Globe modem/router used is Gigaset SE260.

Heres my yahoo.com tracert:


Tracing route to yahoo.com [206.190.60.37]
over a maximum of 30 hops:

1 <1 ms <1 ms <1 ms dsldevice.domain.name [192.168.1.1]
2 31 ms 31 ms 31 ms 120.28.245.1
3 31 ms 30 ms 31 ms 222.127.228.37
4 32 ms 31 ms 30 ms 120.28.0.205
5 47 ms 46 ms 47 ms 120.28.0.26
6 48 ms 54 ms 48 ms 120.28.0.1
7 48 ms 48 ms 48 ms 120.28.0.30
8 47 ms 46 ms 46 ms 203.177.31.38
9 47 ms 46 ms 51 ms 203.177.211.218
10 133 ms 133 ms 134 ms so-1-2-0.gw4.mnl1.asianetcom.net [203.192.188.13
]
11 167 ms 166 ms 167 ms po1-0-0.cr1.nrt1.asianetcom.net [202.147.24.214]

12 293 ms 293 ms 293 ms po7-0-0.gw1.sjc1.asianetcom.net [202.147.0.34]
13 282 ms 285 ms 287 ms PAT1.SJC.yahoo.com [206.223.116.150]
14 322 ms 315 ms 316 ms as0.pat1.dnx.yahoo.com [216.115.101.148]
15 377 ms * 376 ms so-1-0-0.pat1.che.yahoo.com [216.115.96.35]
16 381 ms 378 ms 375 ms so-1-0-0.pat1.dcp.yahoo.com [216.115.101.152]
17 374 ms 378 ms 377 ms ae2-p160.msr1.re1.yahoo.com [216.115.108.65]
18 379 ms 380 ms 375 ms te-8-3.bas-a1.re4.yahoo.com [216.39.49.1]
19 381 ms 380 ms 381 ms w2.rc.vip.re4.yahoo.com [206.190.60.37]

Trace complete.

[Rollingstone]

What kind of Brand & Model of your modem/router ?

Try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1450
TTL - 64
Windows Scaling - check
TCP Receive Window - 129720
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 10
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 80
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768

[frOst_EntAngLE]

Modem: Siemens Gigaset SE60 dsl ADSL2+ Ethernet Modem

Heres the TCP Analyzer Results after the above settings:
« SpeedGuide.net TCP Analyzer Results »
Tested on: 02.27.2009 23:19
IP address: 120.28.xxx.xxx
Client OS: Windows XP

TCP options string: 020405820103030101010402
MSS: 1410
MTU: 1450
TCP Window: 129720 (multiple of MSS)
RWIN Scaling: 1 bits (2^1=2)
Unscaled RWIN : 64860
Recommended RWINs: 64860, 129720, 259440, 518880, 1037760
BDP limit (200ms): 5189kbps (649KBytes/s)
BDP limit (500ms): 2076kbps (259KBytes/s)
MTU Discovery: ON
TTL: 41
Timestamps: OFF
SACKs: ON
IP ToS: 01010000 (80)
Precedence: 010 (immediate)
Delay: 1 (low delay)
Throughput: 0 (normal throughput)
Reliability: 0 (normal reliability)
Cost: 0 (normal cost)
Check bit: 0 (correct)
DiffServ: AF22 010100 (20) - Assured Forwarding class 2, medium drop precedence (RFC 2597).

speedtest results..
http://www.speedtest.net/result/419871110.png (http://www.speedtest.net)

[frOst_EntAngLE]

up.. please help

[Rollingstone]

Modem: Siemens Gigaset SE60 dsl ADSL2+ Ethernet Modem

I guess it's caused your MTU limitation !

Do a tracert yahoo.com and post.

[frOst_EntAngLE]

1 <1 ms <1 ms 3 ms dsldevice.domain.name [192.168.1.1]
2 37 ms 31 ms 30 ms 120.28.201.1
3 37 ms 31 ms 31 ms 222.127.228.41
4 44 ms 46 ms 46 ms 124.6.148.229
5 186 ms 184 ms 191 ms so-1-2-0.gw4.mnl1.asianetcom.net [203.192.188.13

6 233 ms 230 ms 229 ms po1-0-0.cr1.nrt1.asianetcom.net [202.147.24.214]

7 354 ms 360 ms 360 ms po7-0-0.gw1.sjc1.asianetcom.net [202.147.0.34]
8 235 ms 229 ms 228 ms PAT1.SJC.yahoo.com [206.223.116.150]
9 257 ms 256 ms 256 ms as0.pat1.dnx.yahoo.com [216.115.101.148]
10 304 ms 307 ms 304 ms so-1-0-0.pat1.che.yahoo.com [216.115.96.35]
11 354 ms 314 ms 314 ms so-1-0-0.pat1.dcp.yahoo.com [216.115.101.152]
12 322 ms * 303 ms ae2-p160.msr1.re1.yahoo.com [216.115.108.65]
13 302 ms 305 ms 301 ms te-8-3.bas-a1.re4.yahoo.com [216.39.49.1]
14 307 ms 307 ms 308 ms w2.rc.vip.re4.yahoo.com [206.190.60.37]

[frOst_EntAngLE]

up

[mccoffee]

You got two things going on the mtu raise will help what dsl modem brand and series number do you own? It could be stuck there. At hop 5and6 that is a huge spike there is nothing you could do to fix it ,but the mtu raise should help a bit.

Try typing in 1500 for mtu in opitimizer leave everything blank apply changes and reboot see if the mtu gets raised.

If not try thease steps http://support.microsoft.com/kb/283165

[frOst_EntAngLE]

You got two things going on the mtu raise will help what dsl modem brand and series number do you own? It could be stuck there. At hop 5and6 that is a huge spike there is nothing you could do to fix it ,but the mtu raise should help a bit.

Try typing in 1500 for mtu in opitimizer leave everything blank apply changes and reboot see if the mtu gets raised.

If not try thease steps http://support.microsoft.com/kb/283165

Modem: Siemens Gigaset SE60 dsl ADSL2+ Ethernet Modem
NIC: Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC

ok il try your suggestion..thanks for the reply...really need this badly.

[frOst_EntAngLE]

the MTU gets raised to 1500 after restarting..

Here is the new tracert to yahoo.com results

Tracing route to yahoo.com [206.190.60.37]
over a maximum of 30 hops:

1 <1 ms <1 ms <1 ms dsldevice.domain.name [192.168.1.1]
2 31 ms 31 ms 31 ms 120.28.244.1
3 31 ms 30 ms 31 ms 222.127.228.41
4 32 ms 32 ms 31 ms 120.28.0.201
5 47 ms 47 ms 47 ms 120.28.0.26
6 48 ms 48 ms 87 ms 120.28.0.1
7 46 ms 46 ms 46 ms 120.28.0.30
8 47 ms 46 ms 46 ms 203.177.66.214
9 49 ms 48 ms 48 ms 203.177.48.138
10 200 ms 203 ms 206 ms so-1-2-0.gw4.mnl1.asianetcom.net [203.192.188.13
]
11 238 ms 232 ms 236 ms po1-0-0.cr1.nrt1.asianetcom.net [202.147.24.214]

12 353 ms 344 ms 354 ms po7-0-0.gw1.sjc1.asianetcom.net [202.147.0.34]
13 245 ms 245 ms 244 ms PAT1.SJC.yahoo.com [206.223.116.150]
14 273 ms 274 ms 273 ms as0.pat1.dnx.yahoo.com [216.115.101.148]
15 327 ms 328 ms 327 ms so-1-0-0.pat1.che.yahoo.com [216.115.96.35]
16 366 ms 332 ms 433 ms so-1-0-0.pat1.dcp.yahoo.com [216.115.101.152]
17 322 ms 326 ms 373 ms ae2-p170.msr2.re1.yahoo.com [216.115.108.69]
18 323 ms 328 ms 323 ms te-8-3.bas-a2.re4.yahoo.com [216.39.49.5]
19 327 ms 327 ms 325 ms w2.rc.vip.re4.yahoo.com [206.190.60.37]

Trace complete.

Does this work fine?

[mccoffee]

how's the speed your traceroutes are looking better.

[frOst_EntAngLE]

how's the speed your traceroutes are looking better.

its fast but not enough for a 2mb. thanks mccoffee.. i contacted my ISP though.. they checked my PC and found out im only getting a 1mb connection. il just wait for their report and see..

[papa_jo]

Hi frOst_EntAngLE. I have the same problem with my Globelines 2Mbps DSL connection and SE260 Modem. Were they able to solve it? Appreciate your reply. Thanks in advance.

Curious too as to how I can modify the MTU of the SE260. It seems to be fixed at 1452. I can't find those parameters even with the Admin login.

:(

[frOst_EntAngLE]

nope nothing on the above mentioned expert replies did work for me..
i guess we are doomed by this :nope: service

[papa_jo]

Thanks for replying frOst_EntAngLE. I guess we are doomed.