Support for Multipe Public IP addresses

[PhilT]

We had an old ADSL router which supported NAT for more than one public
address. We have 16 addresses allocated and need to setup at least 6
for address translation.
That router failed and we picked up a BELKIN F5D7632uk4A router. It
has much better port forwarding options but we cannot expose more than
one of our public addresses - unless we use the DMZ - which is not an
option we want to use.

Are there any BELKIN routers out there that can support multiple
public addresses?

Can anyone recomend a suitable router (wireless is not important) ?

[stephen]

"PhilT" <google@green-pig.co.uk> wrote in message
news:dccd899f-f25a-4964-b83a-1bd234e7c82d@s8g2000prg.googlegroups.com...
> We had an old ADSL router which supported NAT for more than one public
> address. We have 16 addresses allocated and need to setup at least 6
> for address translation.
> That router failed and we picked up a BELKIN F5D7632uk4A router. It
> has much better port forwarding options but we cannot expose more than
> one of our public addresses - unless we use the DMZ - which is not an
> option we want to use.
>
> Are there any BELKIN routers out there that can support multiple
> public addresses?
>
> Can anyone recomend a suitable router (wireless is not important) ?

just about any cisco running IOS can do this.

but you need to pick one with the connectivity you need, and will not be
anywhere near as cheap as a Belkin.

last time i checked an 1801 (ADSL, 8 port 10/100 switch, ISDN BRI) was $1000
list price....

but - wouldnt you be better off with a conventional LAN to WAN router (ie no
NAT) and a firewall?
--
Regards

stephen_hope@xyzworld.com - replace xyz with ntl