how do i connect to the router via cable??

[langin1]

ive been told to solve my network key problem i need to connect to the
router via the cable then disable the security or change the WEP key

could someone give me a step by step basic guide to doing this as im a
total novice with the wireless system


------------------------------------------------------------------------
View this thread: http://www.wirelessforums.org/showthread.php?t=37394
http://www.wirelessforums.org

[curly Bill]

langin1 wrote:
> ive been told to solve my network key problem i need to connect to the
> router via the cable then disable the security or change the WEP key
>

1. Download the owners manual from the manufactures website

2. Push the reset button to return the router back to manufactures
settings (just like right out of the box)

3. Reinstall router from scratch

[Eric]

"langin1" <langin1.33nasd@no-mx.wirelessforums.org> wrote in message
news:langin1.33nasd@no-mx.wirelessforums.org...
>
> ive been told to solve my network key problem i need to connect to the
> router via the cable then disable the security or change the WEP key
>
> could someone give me a step by step basic guide to doing this as im a
> total novice with the wireless system

Look on the back of the router for a small hole. Use a needle to push down
on the reset button in there for a few seconds while powered.

You didn't say what manufacturer your router is, but you will have to get to
it's config page. DLink's are 192.168.0.1, while Linksys are 192.168.1.1.
Don't know about the others. You also have to temporarily give your
wireless NIC a static IP on the same subnet.

WEP? If you are concerned about security, you want WPA. Does the router
belong to your cable company? If so, tell them to take it back and buy one
yourself.

If it belongs to you, and doesn't have WPA (and you are concerned about
security), then all you can really use it for is a wired router by disabling
the radios and breaking the antennas off.