Sokkratez
01-11-07, 07:39 PM
Hi guys. I needed a wireless connection in my home for my laptop to access, so I purchased a D-Link DI-524 revD Wireless router to connect through my D-Link DGL-4100. I had a bit of trouble in the beginning but now I have the LAN itself working fine through the laptop. I can access shared files and folders and access both routers' configuration menus through the laptop (wireless), and my Network Connections folder displays an active internet connection. However, the internet doesn't work. I'm not being assigned a WAN IP, I guess. The internet on the 2 computers and Xbox 360 that are connected by a wire is working fine. I feel I'm very close, but I'm overlooking some small, stupid thing.
The wireless adapter I'm using is a USB adapter. D-Link DWL-G122. I have it set to obtain an IP automatically, though I have tried setting a static IP of 192.168.0.202 with the wireless router's IP set as the gateway and DNS. I end up in the same boat; LAN works, but no internet. My wired router's IP is 192.168.0.1 and my wireless router's IP is set static at 192.168.0.200. DHCP on the wireless router is disabled. I have an SSID specified, Mix Mode is checked, SSID Broadcast is disabled, security is WEP and I have a working 10-digit HEX code. 64 bit encryption. Those are the only changes in the router's settings that I have made since resetting it to default.The DHCP range on my wired router is 192.168.100 to 192.168.0.199. I'm running up-to-date firmware on both routers.
I'm trying to be as detailed as possible off the bat; networking is not my strong point but I'm not completely oblivious. Please let me know if any additional information is needed; any help is greatly appreciated.
The wireless adapter I'm using is a USB adapter. D-Link DWL-G122. I have it set to obtain an IP automatically, though I have tried setting a static IP of 192.168.0.202 with the wireless router's IP set as the gateway and DNS. I end up in the same boat; LAN works, but no internet. My wired router's IP is 192.168.0.1 and my wireless router's IP is set static at 192.168.0.200. DHCP on the wireless router is disabled. I have an SSID specified, Mix Mode is checked, SSID Broadcast is disabled, security is WEP and I have a working 10-digit HEX code. 64 bit encryption. Those are the only changes in the router's settings that I have made since resetting it to default.The DHCP range on my wired router is 192.168.100 to 192.168.0.199. I'm running up-to-date firmware on both routers.
I'm trying to be as detailed as possible off the bat; networking is not my strong point but I'm not completely oblivious. Please let me know if any additional information is needed; any help is greatly appreciated.