Tweak my Bell sympatico

[McLaren_F1]

Hey, I Was Wondering if anyone could tweak my connection.
Windows Xp
1. DSL
2. Connection: Bell Sympatico High Speed

SpeedGuide.net TCP/IP Analyzer
TCP options string = 020405ac01010402

MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.

MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising your MTU value.

Default TCP Receive Window (RWIN) = 65340
RWIN Scaling (RFC1323) = 0 bits
Unscaled TCP Receive Window = 65340

RWIN is a multiple of MSS
Other RWIN values that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
63888 (MSS x 44)

bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 2614 kbps (327 KBytes/s) @ 200ms
Your TCP Window limits you to: 1045 kbps (131 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 115 hops
TTL value is ok.

Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349) = 00000000 (0)

http://www.speedtest.net/result/69915531.png

[trogers]

Use the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1492
TTL - 64
TCP Receive Window - 127776
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - checked
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 80
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

[McLaren_F1]

Just Applied the Settings. Latest Speed Test Results:

TCP options string = 020405ac0103030101010402

MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.

MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising your MTU value.

Default TCP Receive Window (RWIN) = 127776
RWIN Scaling (RFC1323) = 1 bits (scale factor of 2)
Unscaled TCP Receive Window = 63888

RWIN is a multiple of MSS
Other RWIN values that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2) <-- current value
63888 (MSS x 44)

bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 5111 kbps (639 KBytes/s) @ 200ms
Your TCP Window limits you to: 2044 kbps (256 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 51 hops
TTL value is ok.

Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349) = 00010000 (16)
Precedence (priority) = 000 (routine)
Delay = 1 (low delay)
Throughput = 0 (normal throughput)
Reliability = 0 (normal reliability)
Cost = 0 (normal cost)
Check bit = 0 (correct, 8th checking bit must be zero)

DiffServ (RFC 2474) = No valid DiffServ equivalent. See the TCP Optimizer documentation, or RFCs 2474, 2475, 2597, 2598, 2873.


http://www.speedtest.net/result/69918640.png

[trogers]

Do a tracert to www.yahoo.com. and post.

[McLaren_F1]

Do a tracert to www.yahoo.com. and post.


how do i do that?

[trogers]

To do a tracert, click 'Start' and then 'Run'. Type "cmd" into the box and click 'ok'.

A DOS black screen will appear. Type after the C:\>

tracert www.yahoo.com

and press enter key

When test is completed, move mouse cusor to the DOS black screen, click right and choose 'select all'.

Move mouse cursor to the Quick Reply box of this forum, click right and 'paste'.

[McLaren_F1]

Tracing route to www.yahoo-ht2.akadns.net [209.73.186.238]
over a maximum of 30 hops:

1 <1 ms <1 ms <1 ms 192.168.0.1
2 171 ms 144 ms 177 ms bas6-toronto01_lo0_SYMP.net.bell.ca [64.230.1
181]
3 127 ms 46 ms 43 ms dis5-toronto01_Vlan106.net.bell.ca [64.230.20
7]
4 47 ms 66 ms 46 ms core1-toronto01_GE11-1.net.bell.ca [64.230.23
45]
5 91 ms 73 ms 45 ms core3-toronto12_POS13-1.net.bell.ca [64.230.2
157]
6 46 ms 46 ms 75 ms if-7-0.core1.TTT-Scarborough.teleglobe.net [2
58.25.69]
7 177 ms 66 ms 64 ms if-3-3.mcore3.NJY-Newark.teleglobe.net [216.6
.33]
8 83 ms 99 ms 108 ms 216.6.97.37
9 117 ms 185 ms 156 ms if-1-0-0.core3.AEQ-Ashburn.teleglobe.net [216
51.5]
10 70 ms 68 ms 69 ms ix-3-1-8.core3.AEQ-Ashburn.teleglobe.net [216
51.26]
11 84 ms 153 ms 170 ms ge-3-1-0-p150.msr2.re1.yahoo.com [216.115.108
]
12 70 ms 91 ms 176 ms ge-1-41.bas-a2.re3.yahoo.com [66.196.112.201]
13 132 ms 126 ms 190 ms f1.www.vip.re3.yahoo.com [209.73.186.238]

Trace complete.

[trogers]

Tracing route to www.yahoo-ht2.akadns.net [209.73.186.238]
over a maximum of 30 hops:

1 <1 ms <1 ms <1 ms 192.168.0.1
2 171 ms 144 ms 177 ms bas6-toronto01_lo0_SYMP.net.bell.ca [64.230.xxx.xxx]
3 127 ms 46 ms 43 ms dis5-toronto01_Vlan106.net.bell.ca [64.230.20.7]


The 3 ping times at hop 2 which is your modem are way too high. I suspect you have placed your modem near to some other electrical device. Relocate your modem a few feet away from any other electrical device, including the router or comp tower.

Power off comp, router and modem for a few minutes. Then reboot and test speed.

[McLaren_F1]

The 3 ping times at hop 2 which is your modem are way too high. I suspect you have placed your modem near to some other electrical device. Relocate your modem a few feet away from any other electrical device, including the router or comp tower.

Power off comp, router and modem for a few minutes. Then reboot and test speed.

Yeah, My Modem is right Beside My Router.

[McLaren_F1]

Latest Trace

Tracing route to www.yahoo-ht2.akadns.net [209.73.186.238]
over a maximum of 30 hops:

1 <1 ms <1 ms <1 ms 192.168.0.1
2 47 ms 46 ms 46 ms bas6-toronto01_lo0_SYMP.net.bell.ca [64.230.197.
181]
3 44 ms 45 ms 45 ms dis5-toronto01_Vlan106.net.bell.ca [64.230.202.5
7]
4 45 ms 44 ms 44 ms core2-toronto01_GE11-1.net.bell.ca [64.230.234.2
53]
5 46 ms 45 ms 46 ms core4-toronto63_POS13-1.net.bell.ca [64.230.233.
93]
6 45 ms 46 ms 45 ms if-2-3.mcore3.TTT-Scarborough.teleglobe.net [216
.6.98.5]
7 64 ms 65 ms 64 ms if-4-0.mcore4.NJY-Newark.teleglobe.net [216.6.98
.2]
8 64 ms 65 ms 64 ms if-12-0.mcore3.NJY-Newark.teleglobe.net [216.6.5
7.17]
9 66 ms 63 ms 63 ms 216.6.97.37
10 68 ms 68 ms 69 ms if-1-0-0.core3.AEQ-Ashburn.teleglobe.net [216.6.
51.5]
11 70 ms 70 ms 68 ms ix-14-2.core3.AEQ-Ashburn.teleglobe.net [63.243.
149.110]
12 69 ms 70 ms 70 ms ge-3-1-0-p150.msr2.re1.yahoo.com [216.115.108.61
]
13 70 ms 70 ms 70 ms ge-1-30.bas-a2.re3.yahoo.com [66.196.112.37]
14 70 ms 70 ms 71 ms f1.www.vip.re3.yahoo.com [209.73.186.238]

Trace complete.

[trogers]

Tracert is good. How is your speed?

[McLaren_F1]

Latest Speed Test:

http://www.speedtest.net/result/69926308.png

[trogers]

Your speed package is probably capped at 1500 kbps.

Use the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1492
TTL - 64
TCP Receive Window - 63888
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - uncheck
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 80
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

[McLaren_F1]

Latest Speed Test:

http://www.speedtest.net/result/69929081.png

[flape]

[QUOTE=trogers;1967513]Use the following with TCP Optimizer:

NetbtPriority - 1 not 8
Lan Browsing speedup - off not optimized
QoS: NonBestEffortLimit - 1

that's the only thing to do... Like in Europe!!!

Bye Franco.

[flape]

No ping