mistral wrote:
> Alan писал(а):
>
>> mistral wrote:
>>> Alan писал(а):
>>>
>>>> mistral wrote:
>>>>> Kay Archer писал(а):
>>>>>
>>>>> "mistral" <polychrom@softhome.net> wrote in message
>>>>> news:1159971856.239524.283500@c28g2000cwb.googlegroups.com...
>>>>> How to get DSL settings from Siemens SpeedStream 4100 DSL modem? Is
>>>>> there a way get(download and preview) DSL configuration settings from
>>>>> this modem? Modem comes preconfigured by provider.
>>>>>
>>>>>> Connect a computer to the modem.
>>>>>> Turn on modem
>>>>>> Turn on computer
>>>>>> Use a browser to open http://192.168.0.1
>>>>>> Click on Advanced.
>>>>>> (you then have lots of things to look at)
>>>>> ----------------
>>>>>
>>>>> I can no connects to this url http://192.168.0.1
>>>>>
>>>>> m.
>>>>>
>>>> Are you asking about the router rather than the modem? The
>>>> address of the router is http://speedstream
>>> -------------
>>>
>>> Its called "SpeedSream 4100 Ethernet ADSL modem" From User's Guide:
>>> "...enter the default router IP address http://speedstream and press
>>> Enter" This opens Siemens subscriber network page, but there are no
>>> any admin "gateway administrator setup" window.
>>>
>>> m.
>>>
>> Assuming that you rebooted your PC after installing the 4100 and
>> you can connect to the internet, I am stumped as to why the HTTP
>> server inside the 4100 is not recognizing http://speedstream as a
>> valid address.
>>
>> You can try this. It will turn off the search engine in the
>> location bar.
>>
>> Enter about:config in the location bar. In the filter bar enter
>> the word "keyword" without the quotes. You should get two hits.
>> The first one keyword.url tells you which search engine and what
>> parameters are being used any time you enter something other than
>> a valid address in the location bar. The second hit
>> keyword.enabled turns the engine on or off. The value is
>> probably set to true. Double click the entry and the value will
>> change to false. Close Firefox. Relaunch FF and try
>> http://speedstream again.
>>
>> You can change the setting back to true by repeating the above.
>
> -----------------------
>
> All this not help. The same result. What i can assume: ISP/DSL provider
> may reconfigure modem, so it not connect to default manufacturer
> gateway anymore. This modem comes to user already preconfigured, so
> user just connect cables, etc. Since DSL provider is a monopolist, he
> does not provide any tech information at all, and requires to use only
> a model which he sells. I have another modem and I want connect it to
> DSL, but I need know existing DSL parameters to configure DSL settings
> properly, and I need obtain this parameters from existing SpeedSream
> 4100 ADSL modem in some way. What is way to extract and view
> information about existing DSL settings?
>
If you post to this newsgroup the name of your ISP
and where you are located, someone may be able to tell you the
settings you want.