Help me tweak my connection

[egyteam]

TCP options string = 0204059801010402
MTU = 1472
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput. If you are using a router, it could be limiting your MTU regardless of Registry settings.
MSS = 1432
Maximum useful data in each packet = 1432, which equals MSS.
Default TCP Receive Window (RWIN) = 64440
RWIN Scaling (RFC1323) = 0 bits
Unscaled TCP Receive Window = 64440

RWIN is a multiple of MSS
Other RWIN values that might work well with your current MTU/MSS:
504064 (MSS x 44 * scale factor of 8)
252032 (MSS x 44 * scale factor of 4)
126016 (MSS x 44 * scale factor of 2)
63008 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 2577.6 kbps (322.2 KBytes/s) @ 200ms
Your TCP Window limits you to: 1031.04 kbps (128.88 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 54 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 11110000 (240)

Precedence (priority) = 111 (Network Control)
Delay = 1 (low delay)
Throughput = 0 (normal throughput)
Reliability = 0 (normal reliability)
Cost = 0 (normal cost)
Check bit = 0 (correct, 8th checking bit must be zero)

DiffServ (RFC 2474) = No valid DiffServ equivalent. See the TCP Optimizer documentation, or RFCs 2474, 2475, 2597, 2598, 2873.

---------------------------------------------------------------------

Thanks

[mccoffee]

your mtu is off you need to get it at 1480 or 1492

Try thease in the sg optmizer below me to download and install

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1500
TTL - 64
TCP Receive Window - blank
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - uncheck
Timestamps - uncheck
Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 240
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

VERY IMPORTANT TO DO THE FOLLOWING:
1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need. For a stand alone pc all you need is Internet Protocol TCP/IP.
2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.
3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer and set your duplex mode to "auto". If you are using a router make sure you have the latest firmware.
4. Clean out your temporary internet files with CrapCleaner (http://www.ccleaner.com).
5. Power cycle your modem i.e. unplug it for at least 15 seconds.
6. Download, update and scan with SpyBot S&D 1.4 (http://majorgeeks.com/download2471.html) EXACTLY as mnosteele has explained HERE (http://broadbandnuts.com/drtweak/index.php?board=4;action=display;threadid=41) & Ad-Aware SE 1.06 (http://lavasoft.element5.com/support/download) EXACTLY as mnosteele has explained HERE (http://broadbandnuts.com/drtweak/index.php?board=4;action=display;threadid=40) to remove any spyware then install and update SpywareBlaster 3.4 (http://www.javacoolsoftware.com/spywareblaster.html) to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES. If these 2 programs find a lot of things then please post a HijackThis 1.99.1 (http://www.majorgeeks.com/download3155.html) log for us to look at.
7. Make sure you do the faster web page tweak in our Help & Tips (http://broadbandnuts.com/index.php?page=tiptrix) page.
8. If you have Zone Alarm as a firewall uninstall it and search your pc for the left over files.
9. Install Kerio Personal Firewall 2.1.5 (http://www.321download.com/LastFreeware/page7.html#Kerio%20Personal%20Firewall), it's FREE and uses next to no resources.
10. Do a FREE online virus scan from Kaspersky Webscan (http://www.kaspersky.com/beta), make sure to check the option to use the EXTENDED DATABASE.
11. Make sure you have ALL of the latest Windows Updates.

8) ;D

[egyteam]

do i have also to change the MTU from the router itself or using tcoptimizer is enough ?

TCP Receive Window - blank: you meant not not enter any numbers ?

Also I want to add my connection is PPoA
Protocol: PPoA
VPI/VCI: 0/35
Encapsulation: VC MUX
QoS Class: UBR
PCR/SCR/MBS: 4000/4000/10

thanks

[mccoffee]

You would need to do it from the router it self also you might have to upgrade the frimware first before chaning the mtu. Goto router's manufactures site look for a newer firmware version and upgrade it. Should have instructs when you downlod the firmware.

[egyteam]

I tried 1492 and 1500, 1492 gives me more stable download speed

anything I can do in this settings to improve the connection speed:

1- Encapsulation: VC MUX
2- QoS Class: UBR/VBR/CBR ?
3- PCR/SCR/MBS: 4000/4000/10

[mccoffee]

leave the rest of the stuff alone try thease in the optimizer reboot take another anlyzer

Try thease in the sg optmizer below me to download and install

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1500
TTL - 64
TCP Receive Window - 63888
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - uncheck
Timestamps - uncheck
Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 240
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

VERY IMPORTANT TO DO THE FOLLOWING:
1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need. For a stand alone pc all you need is Internet Protocol TCP/IP.
2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.
3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer and set your duplex mode to "auto". If you are using a router make sure you have the latest firmware.
4. Clean out your temporary internet files with CrapCleaner (http://www.ccleaner.com).
5. Power cycle your modem i.e. unplug it for at least 15 seconds.
6. Download, update and scan with SpyBot S&D 1.4 (http://majorgeeks.com/download2471.html) EXACTLY as mnosteele has explained HERE (http://broadbandnuts.com/drtweak/index.php?board=4;action=display;threadid=41) & Ad-Aware SE 1.06 (http://lavasoft.element5.com/support/download) EXACTLY as mnosteele has explained HERE (http://broadbandnuts.com/drtweak/index.php?board=4;action=display;threadid=40) to remove any spyware then install and update SpywareBlaster 3.4 (http://www.javacoolsoftware.com/spywareblaster.html) to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES. If these 2 programs find a lot of things then please post a HijackThis 1.99.1 (http://www.majorgeeks.com/download3155.html) log for us to look at.
7. Make sure you do the faster web page tweak in our Help & Tips (http://broadbandnuts.com/index.php?page=tiptrix) page.
8. If you have Zone Alarm as a firewall uninstall it and search your pc for the left over files.
9. Install Kerio Personal Firewall 2.1.5 (http://www.321download.com/LastFreeware/page7.html#Kerio%20Personal%20Firewall), it's FREE and uses next to no resources.
10. Do a FREE online virus scan from Kaspersky Webscan (http://www.kaspersky.com/beta), make sure to check the option to use the EXTENDED DATABASE.
11. Make sure you have ALL of the latest Windows Updates.

8) ;D

[MadDoctor]

Hi McCoffee! :)

[mccoffee]

Md what's up devil dog?


How's the wife kids farm?

[MadDoctor]

Md what's up devil dog?


How's the wife kids farm?Not much up (yet) but I have a little blue pill here in my hand to help me out tonight! :D

Wife and kids are good. Farm animals are a little nervous. :rotfl: