What is a decent speed?

[Red Skittles]

Okay, I don't really know what a 'decent' dsl speed is. Here are my results..

:::.. Download Stats ..:::
Connection is:: 2522 Kbps about 2.5 Mbps (tested with 2992 kB)
Download Speed is:: 308 kB/s
Tested From:: http://testmy.net/ (server2)
Test Time:: Tue Jul 5 17:45:11 CDT 2005
Bottom Line:: 45X faster than 56K 1MB download in 3.32 sec
Diagnosis: Awesome! 20% + : 44.03 % faster than the average for host (swbell.net)
Validation Link:: http://testmy.net/stats/id-SVAH3K4ZC

What do you guys think? I have no idea what is considered a good speed.

1. Your Tweakable Settings:
Receive Window (RWIN): 65535
Window Scaling: off
Path MTU Discovery: ON
RFC1323 Window Scaling: OFF
RFC1323 Time Stamping: OFF
Selective Acks: ON
MSS requested: 1440
TTL:
(less any hops behind firewall)
132
TTL remaining: 121

2. Test 146000 byte download
Actual data bytes sent: 146000
Actual data packets: 102
Max packet sent (MTU): 1480
Max packet recd (MTU): 1480
Retransmitted data packets: 0
sacks you sent: 0
pushed data pkts: 5
data transmit time: 0.534 secs
our max idletime: 76.0 ms
transfer rate: 135373 bytes/sec
transfer rate: 1082 kbits/sec
This is not a speed test!
transfer efficiency: 100%


3. ICMP (ping) check
Minimum ping: 49 ms
Maximum ping: 50 ms
Ping stability:
50 49 49 50 49 50 50 50 49 50

[mccoffee]

your rwin is off try thease

Try thease in the sg optmizer below me to download and install

check - custom settings
network adapter selection -
check modify all adapters
maxmtu 1500
TTL - 64
TCP Receive 64240
MTU Discovery - yes
Black Hole Detect - no
Selective Acks - yes
Max Dup ACKs - 2
TCP 1323 nothing checked
Other Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
Lan Browsing Speedup - optimized
Then select "Apply Changes" and reboot to take effect.

VERY IMPORTANT TO DO THE FOLLOWING:
1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need. For a stand alone pc all you need is Internet Protocol TCP/IP.
2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.
3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer and set your duplex mode to "auto". If you are using a router make sure you have the latest firmware.
4. Clean out your temporary internet files with CrapCleaner.
5. Power cycle your modem i.e. unplug it for at least 15 seconds.
6. Download, update and scan with SpyBot S&D 1.4 http://majorgeeks.com/download2471.html EXACTLY as I explain HERE http://lavasoft.element5.com/support/download& Ad-Aware SE 1.06 EXACTLY as I explain HERE to remove any spyware then install and update SpywareBlaster 3.4 http://www.javacoolsoftware.com/spywareblaster.htmlto stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES. If these 2 programs find a lot of things then please post a HijackThis 1.99.1 log for us to look at.
7. Make sure you do the faster web page tweak in our Help & Tips page.
8. If you have Zone Alarm as a firewall uninstall it and search your pc for the left over files.
9. Install Kerio Personal Firewall 2.1.5, it's FREE and uses next to no resources.
10. Do a FREE online virus scan from Kaspersky Labs.
11. Make sure you have ALL of the latest Windows Updates.

[Red Skittles]

1. Your Tweakable Settings:
Receive Window (RWIN): 64800
Window Scaling: off
Path MTU Discovery: ON
RFC1323 Window Scaling: OFF
RFC1323 Time Stamping: OFF
Selective Acks: ON
MSS requested: 1440
TTL:
(less any hops behind firewall)
68
TTL remaining: 57

2. Test 146000 byte download
Actual data bytes sent: 146000
Actual data packets: 102
Max packet sent (MTU): 1480
Max packet recd (MTU): 1480
Retransmitted data packets: 0
sacks you sent: 0
pushed data pkts: 5
data transmit time: 0.536 secs
our max idletime: 76.9 ms
transfer rate: 138081 bytes/sec
transfer rate: 1104 kbits/sec
This is not a speed test!
transfer efficiency: 100%


3. ICMP (ping) check
Minimum ping: 49 ms
Maximum ping: 52 ms
Ping stability:
50 49 50 49 50 50 50 52 50 50


Don't really think anything changed :(

Ohh, nevermind. The RWIN did. So what is this supposed to do?