PDA

View Full Version : Also need help with cable speed


Chris_Err
02-11-01, 06:27 PM
I'm not sure that my registry is backed up. So I used the Default one on this site. Would that put me back to the normal settings?

Lobo
02-11-01, 06:32 PM
No, the only thing the one on this site will do is take out or settings, If you have put other setting's in, which seem to be the case according to your speed I would suggest you start over and come back here before you do anything. :confused:

Chris_Err
02-11-01, 06:36 PM
And that would be do a format of hard drive and reinsatll fresh would be my best bet ?

glc1
02-11-01, 06:36 PM
Originally posted by Chris_Err:
Would that put me back to the normal settings?

Only if the SG patches were used.

Lobo
02-11-01, 06:38 PM
Yes that would put everything back to default and you need to come here and backup registry first :)

Chris_Err
02-11-01, 06:44 PM
ok, U bet I will lesson learned. Can u guide me to where or how best way to do a format.I've done it before but was wondering best possible ways to do it. Should i remove v-card,sound ,nic card etc before i reinstall?

Lobo
02-11-01, 06:47 PM
No you don't remove anything, the best way is in your search box just type how to format
print the directions and your set :eek:

Chris_Err
02-11-01, 06:51 PM
OK thanks alot for the help gonna put a pot of coffee on get busy, again thank you

Lobo
02-11-01, 06:53 PM
OK, hope all goes well :cool:

Chris_Err
02-11-01, 10:22 PM
Ok Mr.Lobo I'm back from doing format and reinsatll. I did what U told the other fella to do bout downloading Faster loading web page patch. and merged it. OH and registry was backed up to C drive before. Went to DSL Reports tools and did tweak test here are results: Hope you can help me out thanks in advance Chris_Err

Please wait .. collecting data
* Some tests failed.
* If you are in USA, check your high ping time
* Your RWIN 8192 is too low
* Recommendations end.
* Detail..
TCPopts hex string is 020405b401010402
Max Segment Size is 1460
* Your MTU is set ok
SACK Permitted (RFC2018)
Ping stability 1180 1184 1171 1180 1187 1187 - - - -
* Unusually high average ping time
No packet loss test will be done
DefaultRcvWindow (RWIN) is 8192
Your RWIN limits you @1181.5ms to 55kbps
Your RWIN limits you @200ms to 327kbps
Your Path MTU Discovery is ON
Max sized data packet from you 1500
* End

Lobo
02-11-01, 10:30 PM
I working with someone else right now so I will leave you all the instructions, from looking at your test resesults in have not installed our patch, I hope you have downloaded winzip, have you

Chris_Err
02-11-01, 10:38 PM
Hello, and yes winzip is downloaded, only patch is the webpage loading faster is all I have done so far

Lobo
02-11-01, 10:38 PM
It does not matter that you backed up registry before you formatted, it's gone you have to do it again, please slow down and follow directions, if you do not have winzip you must getit and install before you can download patchs, go to www.download.com (http://www.download.com) to get it Winzip 8.0
First bring up REGEDIT, type REGEDIT in your run box and hit OK.
Under Registry at the top of the box, click on that, now click on Export Registry File, a box will come up asking where you want to export it to, just put it in your C drive, then name it at the bottem of box, Registry.
Click on save.
Now if you ever get in trouble or want the old regestry back, bring REGEDIT back up and click on Registry and click on import registry file, go to your C drive and click on registry and click open, reboot and your good to go.
Anytime you add a new program, backup again, any program, back it up to the same place as the last one, it will overwrite it. If you do not backup after each new program is instaled you will not have those setting's in regestry if you have to backup for some reason.
1. You probaly need to PRINT these instructions!!!!!!!!!!!!

Go to main page on Speedguide, go to patch page (Listed on left)
2. Download the faster loading of webpages for your OS, download the speedpatch for your OS, becarefull, there are alot of patches on this page.
3. Download the back to default patch for your OS, do not install this patch, just download it in case you ever want to change patches.
4. You may need 1 more patch if you are running WIN 95,98 or 98SE we will know after test.
5. Go to www.dslreports.com/tools (http://www.dslreports.com/tools) bookmark this page as you may wish to return. Run tweak tester, check the verbose box, turn off firewalls, if you have one, copy the results by highlighing everything in the box with your mouse, then hit Ctrl & c, with your key board, come back to Speedguide and in same post you were in reply, when box comes up , cursor blinking at start of box hit Ctrl & v, this will copy results in box so I may look at them.
7. I do not recommend adding any other patches, all these tests change by the minute so don't be fooled an start adding patch after patch.
8. The best time to test for speed is early in the morning when no one (or not many) people are on the net.
9. Nothing should be running during any test, no virus stuff, firewalls,
and always clear (Delete, no this will not harm your system) your temp internet files before each test, not once during testing, after each test.
10. Do not add other speed patches on top of each other, always go back to default before trying another patch, I am aware of only one patch that will remove previous patch without having to return to default.
11. In the future, here are some other sites you may wish to visit, go to www.testmyspeed.com. (http://www.testmyspeed.com.) Please bookmark that page as well as www.pcpitstop.com (http://www.pcpitstop.com) so you may return. Also another good dowload site would be www.happypuppy.com (http://www.happypuppy.com) click on 10 demos and a large download file, do not download the whole file, just most of it.
12. You may in the future wish to go to www.AnalogX.com (http://www.AnalogX.com) and download Net Stat Live, run this while downloading a large file.
13. Please take your time and good luck. I would suggest at least 128 RAM and read up on all this, but be care full.
14. The most accurate way of testing speed is downloading large file as explained above from somewhere like www.happypuppy.com (http://www.happypuppy.com) (not all of it, just most of it). All other speed test sites will vary.
When refering to speed Kb is Kilobits
KB is Kilobytes

:cool:

Lobo
02-11-01, 10:57 PM
Elvis has left, I'll be back early in morning or someone else may help you :eek:

Lobo
02-12-01, 11:36 AM
I'm not sure you reformated or just put on your OS on again, if by chance you just put OS on again you need to backup your registry again.
If you ever go back to the one you created before you put on new OS, you will be back in same boat you were in before. Backup your resistry to the same place as old one, it will overwrite it. :) :)

Chris_Err
02-12-01, 03:37 PM
Good mornin Mr.Lobo, I did reformat hard drive and reinstall win98, the put in win98se.
Backup regidtry to C drive as your instructions. Downloaded Webpage loading faster,and merge it and downloaded Default patch. Also downloaded Mtupatch98 and merged it as well. Here are results of test:

Please wait .. collecting data
* Your RWIN reads as 65535
* All tests passed perfectly.
* We recommend you leave everything as it is!
Detail..
TCPopts hex string is 020405b401010402
Max Segment Size is 1460
Your MTU is set ok
SACK Permitted (RFC2018)
Ping stability 139 124 132 139 124 131 170 140 144 128
Quick packet-loss tested ok
DefaultRcvWindow (RWIN) is 65535
Your RWIN limits you @137.1ms to 3824kbps
Your RWIN limits you @200ms to 2621kbps
Your RWIN is set ok at 65535
Your Path MTU Discovery is ON
Max sized data packet from you 1500
* End

Looks good right? Waiting for words of wisdom :)

Chris_Err
02-12-01, 03:59 PM
Mr.Lobo I gotta head into work .But will check back later if work load permits me to. And thanks for the help anything I need to change I can when I get home this evening.


Oh btw, Dale almost got the Bud Shoot Out :D
Good race!!

Lobo
02-12-01, 04:24 PM
Sir when you get home go to patch page, this site and download and install Vtcp386 Fix, reboot after install and post test results this sould speed you up nicely :p

Lobo
02-12-01, 04:26 PM
And yes Dale almost won, Thursday they run the 2 125's :eek:

Gandalf
02-12-01, 04:40 PM
Mr lobo eh? :rolleyes:

Chris_Err
02-12-01, 09:23 PM
OK, Lobo will do when I get home work, Still here :( And post results after installing that patch. If you would check it out tomorrow morning let me know what you think.Cause I wont be home till after midnight. Thanks alot

Chris_Err
02-13-01, 02:56 AM
Here are the results after installing Vtcp386 patch: Anyone have input feel free, should this be ok? Or need more tweaking?

* Please wait .. collecting data
* Your RWIN reads as 65535
* All tests passed perfectly.
* We recommend you leave everything as it is!
Detail..
TCPopts hex string is 020405b401010402
Max Segment Size is 1460
Your MTU is set ok
SACK Permitted (RFC2018)
Ping stability 63 57 63 70 69 64 78 56 58 70
Quick packet-loss tested ok
DefaultRcvWindow (RWIN) is 65535
Your RWIN limits you @64.8ms to 8090kbps
Your RWIN limits you @200ms to 2621kbps
Your RWIN is set ok at 65535
Your Path MTU Discovery is ON
Max sized data packet from you 1500
* End

Check back later gonna get some sleep Thanks Lobo

Bigpoppapump
02-13-01, 03:03 AM
Chris, your RWIN is still at 65535.... go download the Microsoft Vtcp386 Fix patch... install,reboot,test and post back.

Chris_Err
02-13-01, 03:14 AM
OK put in cablenut patch hows this? That Vtcp386fix patch don't seem to install tried it several times

* Please wait .. collecting data
* Your RWIN reads as 511424 (scaling is on)
* All tests passed perfectly.
* We recommend you leave everything as it is!
Detail..
TCPopts hex string is 020405b40103030301010402
Max Segment Size is 1460
Your MTU is set ok
Window Scaling 3 bits (RFC1323)
SACK Permitted (RFC2018)
Ping stability 76 62 60 57 57 59 55 60 54 88
Quick packet-loss tested ok
Scaled DefaultRcvWindow (RWIN) is 511424
Your RWIN limits you @62.8ms to 65149kbps
Your RWIN limits you @200ms to 20456kbps
Your RWIN is advertised as 511424 (scaling is on)
(Beyond 65k, advertised RWIN is scaled)
Your Path MTU Discovery is ON
Max sized data packet from you 1500
* End

[ 02-13-2001: Message edited by: Chris_Err ]

Bigpoppapump
02-13-01, 03:23 AM
Xcellent!!!!!!!

Chris_Err
02-13-01, 03:27 AM
Holy Cow just went to happypuppy try a download 83meg file. Towards the end of download I was getting 484KB/SEC :eek: :p :) :D

Man you guys are great thanks a million

Lobo
02-13-01, 06:45 AM
Oh it installed Sir, and you will be faster in morning, if it had not of installed your RWIN would be 65535 :)