Verizon business DSL 3/768

[Gangsta2002004]

1. Verizon bussiness DSL 3/768 (PPoE)
2.Westall infospeed DSL Modem Bell Atlantic
3.Linksys BEFSR41/BEFSR11/BEFSRU31
4.3CoM Router office connect Hub speed 16
5.Sky link 8 port N-way Fast Ethernet switch Net 1008

3 computer have window xp pro sp2 and 1 have window ME

http://www.dslreports.com/speedtests/2348802;702082;702fde62ebfb9b7edfcb06750fd0b8da;2.0;nyc.speakeasy.net/1105130568
We have westall 2200 but we never use it. Should we change our dsl modem?

Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
Notes: Read the Analyzer FAQ if the above is not your IP address.

TCP options string = 0204059c0103030301010402
MTU = 1476
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput. If you are using a router, it could be limiting your MTU regardless of Registry settings.
MSS = 1436
MSS is not fully optimized for broadband (although it might work well for slower connections). Consider increasing your MTU value.

Default Receive Window (RWIN) = 384000
RWIN Scaling (RFC1323) = 3 bits (scale factor of 6)
Unscaled Receive Window = 48000

For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
505472 (MSS x 44 * scale factor of 8)
252736 (MSS x 44 * scale factor of 4)
126368 (MSS x 44 * scale factor of 2)
63184 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 15360 kbps (1920 KBytes/s) @ 200ms
Your RcvWindow limits you to: 6144 kbps (768 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 56 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 11110000

Precedence (priority) = 000 (routine)
Delay = 0 (normal delay)
Throughput = 1 (high throughput)
Reliability = 1 (high reliability)
Cost = 1 (low cost)

[mccoffee]

you need to get that mtu up log into the linksys goto the advanced page or status page depending on firmware version and change mtu to 1492 do the same for the 3com router i'm not sure where to change the mtu for that but you need to get that up the modem might have an mtu also so log into there and check there.

[Gangsta2002004]

you need to get that mtu up log into the linksys goto the advanced page or status page depending on firmware version and change mtu to 1492 do the same for the 3com router i'm not sure where to change the mtu for that but you need to get that up the modem might have an mtu also so log into there and check there.

HOw do u upgrade the firmwire version?

I have 1.36, Oct 05 2000 firmware verison.

[mccoffee]

goto linksys and 3 coms website look for firmware upgrades for each model should have instructions on how to do that. With linksys they have a tftp program that you logs into the router and updates the frimware in the firmware pack zipped up comes with instructions.


3com i'm not sure how they do that but goto there sites and look up fimware upgrades i'm sure you'll find it.

[Gangsta2002004]

goto linksys and 3 coms website look for firmware upgrades for each model should have instructions on how to do that. With linksys they have a tftp program that you logs into the router and updates the frimware in the firmware pack zipped up comes with instructions.


3com i'm not sure how they do that but goto there sites and look up fimware upgrades i'm sure you'll find it.

i TRY TO UPGRADE THE FIRMWARE FOR LINKSYS IT KEEP SAYIN TIMEOUT ERROR FOR THE JAVA.

i PUT THE PASSWORD.

[mccoffee]

It could be you don't have remote upgrade enabled i want to say it's on the advanced page or it could security depending on the model and firmware version installed make sure that's enabled.

[Gangsta2002004]

1. Verizon bussiness DSL 3/768 (PPoE)
2.Westall 2200
3.Linksys WRT54G
4.3CoM Router office connect Hub speed 16
5.Sky link 8 port N-way Fast Ethernet switch Net 1008

3 computer have window xp pro sp2 and 1 have window ME
http://www.dslreports.com/speedtests/2799196;732869;ac3aa5a0b6cf411c9ca96571aecaa6a3;2.0;nyc.speakeasy.net/1105649598

Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
Notes: Read the Analyzer FAQ if the above is not your IP address.

TCP options string = 020405ac0103030301010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.

Default Receive Window (RWIN) = 384000
RWIN Scaling (RFC1323) = 3 bits (scale factor of 6)
Unscaled Receive Window = 48000

For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
63888 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 15360 kbps (1920 KBytes/s) @ 200ms
Your RcvWindow limits you to: 6144 kbps (768 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 55 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 11110000

Precedence (priority) = 000 (routine)
Delay = 0 (normal delay)
Throughput = 1 (high throughput)
Reliability = 1 (high reliability)
Cost = 1 (low cost)

[mccoffee]

I wouldn't change the modem why two routers exlpain the network more if you can??



DefaultReceiveWindow 384000
DefaultSendWindow = 65536
DisableAddressSharing = 1
InitialLargeBufferCount = 100
InitialMediumBufferCount = 240
InitialSmallBufferCount = 320
LargeBufferSize = 81920
MaxFastTransmit = 64000
MediumBufferSize = 15040
PriorityBoost = 0
SmallBufferSize = 1280
TransmitWorker = 32
FastSendDatagramThreshold = 4096
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitOnReceives = 0
GlobalMaxTcpWindowSize = 63888
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 1
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfOpenRetried = 80
TcpRecvSegmentSize = 1452
TcpSendSegmentSize = 1452
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize =63888
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 92




1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.



2. Open IE and select tools - internet options - connections -

LAN settings, make sure NOTHING there is checked.



3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.



4. Clear your temporary internet files.



5. Power cycle your modem, unplug it for atleast 15 seconds.



6. Download and update then do a scan with SpyBot 1.2 http://beam.to/spybotsd & Ad Aware 6.0 http://www.lavasoftusa.com/support/download to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.



7. Make sure you do the faster web page tweak in Read1st link.



8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.



9. Install Outpost Firewall http://www.agnitum.com\ (http://www.agnitum.com/) or Sygate Firewall http://www.sygate.com/ , both have FREE and Pro versions and are heads above ZA.



10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 http://www.grisoft.com/us/us_dwnl_free.php is an excellent FREE AV app.



11. Make sure you have ALL of the latest Windows Updates

[Gangsta2002004]

I wouldn't change the modem why two routers exlpain the network more if you can??



DefaultReceiveWindow 384000
DefaultSendWindow = 65536
DisableAddressSharing = 1
InitialLargeBufferCount = 100
InitialMediumBufferCount = 240
InitialSmallBufferCount = 320
LargeBufferSize = 81920
MaxFastTransmit = 64000
MediumBufferSize = 15040
PriorityBoost = 0
SmallBufferSize = 1280
TransmitWorker = 32
FastSendDatagramThreshold = 4096
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitOnReceives = 0
GlobalMaxTcpWindowSize = 63888
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 1
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfOpenRetried = 80
TcpRecvSegmentSize = 1452
TcpSendSegmentSize = 1452
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize =63888
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 92




1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.



2. Open IE and select tools - internet options - connections -

LAN settings, make sure NOTHING there is checked.



3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.



4. Clear your temporary internet files.



5. Power cycle your modem, unplug it for atleast 15 seconds.



6. Download and update then do a scan with SpyBot 1.2 http://beam.to/spybotsd & Ad Aware 6.0 http://www.lavasoftusa.com/support/download to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.



7. Make sure you do the faster web page tweak in Read1st link.



8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.



9. Install Outpost Firewall http://www.agnitum.com\ (http://www.agnitum.com/) or Sygate Firewall http://www.sygate.com/ , both have FREE and Pro versions and are heads above ZA.



10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 http://www.grisoft.com/us/us_dwnl_free.php is an excellent FREE AV app.



11. Make sure you have ALL of the latest Windows Updates

verizon told me to make the westall modem to bridge.

[mccoffee]

about the bridge i was wondering that one too

so is that 3com a hub or router
3.Linksys WRT54G
4.3CoM Router office connect Hub speed 16 i couldn't figure why both that or take the 3com get a swtich

[Gangsta2002004]

about the bridge i was wondering that one too

so is that 3com a hub or router
3.Linksys WRT54G
4.3CoM Router office connect Hub speed 16 i couldn't figure why both that or take the 3com get a swtich
3 com is a HUB(Switch)

The connection is slow.
http://www.dslreports.com/speedtests/483784;698161;9b56286c29bb300a8fe3a1f568df1369;2.0;nyc.speakeasy.net/1105749839

Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322)
Notes: Read the Analyzer FAQ if the above is not your IP address.

TCP options string = 020405ac0103030301010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.

Default Receive Window (RWIN) = 384000
RWIN Scaling (RFC1323) = 3 bits (scale factor of 6)
Unscaled Receive Window = 48000

For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
63888 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 15360 kbps (1920 KBytes/s) @ 200ms
Your RcvWindow limits you to: 6144 kbps (768 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 55 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 01011100

Precedence (priority) = 100 (flash override)
Delay = 1 (low delay)
Throughput = 1 (high throughput)
Reliability = 0 (normal reliability)
Cost = 1 (low cost)

[mccoffee]

I would see if a tech could come out there what is the speed directly to modem no switches and hubs

What's odd was you had a 2.7 which isn't bad why it went back down is odd