...:::• Config manual the Speedtouch 510 •:::...

[cerberatus]

Hy to all

[ env.ini ]
set var=CONF_REGION value="Belgium"
set var=CONF_PROVIDER value="COnsulting - ADSL"
set var=CONF_DESCRIPTION value="Meson4000"
set var=CONF_SERVICE value="COnsulting"
set var=CONF_DATE value="25/09/2004"
set var=CONF_VERSION value="3.8.1.5"
set var=HOST_SETUP value="auto shortcut"
set var=UPGRADE_URL value="http://www.speedtouch.com/upgrade500.htm"
set var=DSL_ADDR value="8*35"
set var=PPPoE_userid value=""
set var=PPPoE_passwrd value=""
set var=passwrd value=""

[ phone.ini ]
add name=ppp addr=8*35 type=ppp

[ qos.ini ]
add name=default class=ubr tx_peakrate=0 tx_sustrate=0 tx_maxburst=0 rx_peakrate=0 rx_sustrate=0

[ bridge.ini ]
config age=300

[ brfilter.ini ]

[ pptp.ini ]

[ dhcp.ini ]
config autodhcp=off scantime=20 spoofing=off trace=off
policy verifyfirst=off trustclient=on
spoof failtime=4 errorlt=60 dodlt=10
pool add name=LAN
pool config name=LAN poolstart=10.0.0.39 poolend=10.0.0.42 netmask=24 gateway=10.0.0.138 primdns=10.0.0.138 leasetime=7200
start

[ mer.ini ]

[ ppp.ini ]
ifadd intf=ppp
rtadd intf=ppp dst=0.0.0.0/0 src=10.0.0.40/1 metric=1
ifconfig intf=ppp dest=ppp user=MYLOGIN password=xxxxxx proto=pppoe encaps=llc accomp=on addrtrans=pat status=up
ifattach intf=ppp

[ cip.ini ]

[ nat.ini ]
bind application=H323 port=1720
bind application=FTP port=ftp
bind application=RTSP port=554
bind application=IRC port=6667
bind application=RAUDIO(PNA) port=7070
bind application=ils port=ldap
bind application=ils port=1002
enable addr=213.219.185.23 type=pat

[ pfilter.ini ]
chain delete chain=sink
chain create chain=sink
chain delete chain=forward
chain create chain=forward
chain delete chain=source
chain create chain=source
rule create chain=sink index=0 srcintf=eth0 srcbridgeport=1 action=accept
rule create chain=sink index=1 srcintfgrp=!wan action=accept
rule create chain=sink index=2 prot=udp dstport=dns action=accept
rule create chain=sink index=3 prot=udp dstport=68 action=accept
rule create chain=sink index=4 action=drop
rule create chain=forward index=0 srcintfgrp=wan dstintfgrp=wan action=drop
rule create chain=forward index=1 src=10.0.0.39 action=accept
rule create chain=forward index=2 src=10.0.0.40 action=accept
rule create chain=forward index=3 src=10.0.0.41 action=accept
rule create chain=forward index=4 src=10.0.0.42 action=accept
rule create chain=forward index=5 dst=10.0.0.39 action=accept
rule create chain=forward index=6 dst=10.0.0.40 action=accept
rule create chain=forward index=7 dst=10.0.0.41 action=accept
rule create chain=forward index=8 dst=10.0.0.42 action=accept
rule create chain=forward index=9 action=drop
rule create chain=source index=0 dstintfgrp=!wan action=accept
rule create chain=source index=1 prot=udp dstport=dns action=accept
rule create chain=source index=2 prot=udp dstport=67 action=accept
rule create chain=source index=3 action=drop

[ pfirewall.ini ]
assign hook=sink chain=sink
assign hook=forward chain=forward
assign hook=source chain=source

[ ip.ini ]
config forwarding=on firewalling=off redirects=on sourcerouting=off netbroadcasts=off ttl=64 fraglimit=64 defragmode=nat addrcheck=static mssclamping=on
apadd addr=10.0.0.138/8 intf=eth0 addroute=no
ifconfig intf=loop mtu=1500 group=local
ifconfig intf=eth0 mtu=1500 group=lan
ifconfig intf=ppp mtu=1492 group=wan
rtadd dst=0.0.0.0/0 intf=eth0 metric=70
rtadd dst=224.0.0.0/4 intf=eth0
rtadd dst=10.0.0.0/24 gateway=10.0.0.138
rtadd dst=255.255.255.255/32 gateway=10.0.0.138
rtadd dst=10.0.0.0/24 src=10.0.0.0/24 gateway=10.0.0.138

[ dnsd.ini ]
domain domain=lan
add hostname=SpeedTouch
start
troff

[ dhcc.ini ]
config trace=off

[ adsl.ini ]
config opermode=multimode maxbitspertoneUS=13

[ system.ini ]
setpassword password=xxxx
config upnp=on mdap=on

[ endofarch ]



thanks for help : mail me : info@belge.info

[FunK]

Is there a question with this config file?
A problem you're having?
Or is this the default config in case others have the same device?