PDA

View Full Version : Help needed


krown
03-11-04, 04:45 PM
I am new here so plz help if you can...what prg do i need?
And how do I do it? :(

I am using XP.
i have Tiscali dsl 512 dl / 256 up

TCP options string = 020405a00103030001010402
MTU = 1480
MTU is optimized for Windows XP PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1440
MSS is optimized for Windows XP PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.

Default Receive Window (RWIN) = 64800
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 64800

RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
506880 (MSS x 44 * scale factor of 8)
253440 (MSS x 44 * scale factor of 4)
126720 (MSS x 44 * scale factor of 2)
63360 (MSS x 44)
bandwidth * delay product:

Your RcvWindow limits you to: 2592 kbps (324 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1036.8 kbps (129.6 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 59 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000

mccoffee
03-11-04, 04:58 PM
Try the following in cablenut

DefaultReceiveWindow =65536
DefaultSendWindow = 32768
DisableAddressSharing = 1
InitialLargeBufferCount = 100
InitialMediumBufferCount = 240
InitialSmallBufferCount = 320
LargeBufferSize = 81920
MaxFastTransmit = 64000
MediumBufferSize = 15040
PriorityBoost = 0
SmallBufferSize = 1280
TransmitWorker = 32
FastSendDatagramThreshold = 4096
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitOnReceives = 0
GlobalMaxTcpWindowSize = Leave blank
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 1
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfOpenRetried = 80
TcpRecvSegmentSize = 1440
TcpSendSegmentSize = 1440
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = Leave blank
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 92





Co/o manosteele52

. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

2. Open IE and select tools - internet options - connections -
LAN settings, make sure NOTHING there is checked.

3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.

4. Clear your temporary internet files.

5. Power cycle your modem, unplug it for atleast 15 seconds.

6. Download and update then do a scan with SpyBot 1.2 http://beam.to/spybotsd & Ad Aware 6.0 http://www.lavasoftusa.com/support/download to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.

7. Make sure you do the faster web page tweak in Read1st link.

8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.

9. Install Outpost Firewall http://www.agnitum.com/products/outpost or Sygate Firewall http://www.sygate.com/, both have FREE and Pro versions and are heads above ZA.

10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 http://www.grisoft.com/us/us_dwnl_free.php is an excellent FREE AV app.

11. Make sure you have ALL of the latest Windows Updates.

krown
03-12-04, 03:09 AM
thx man....
can I also use tcp optimizer (just wondering)?
and what do i do....?

mccoffee
03-12-04, 05:16 AM
If you you use the optimizer you would overwrote what i told you to use in cablenut

With tweaking use one app or the other.

krown
03-12-04, 03:34 PM
ok thx man,,, thx again

krown
03-15-04, 09:30 AM
sorry for being so anoying....

i did what u told me to do, but nothing is happening :(

help me pls....:( :(

mccoffee
03-15-04, 04:03 PM
What is your current speed if you don't live in the usa goto www.testmyspeed.com and select a test server closet city or courntry to you.

krown
03-16-04, 05:44 AM
457.4 Kilobit per sekund
56.1 Kilobyte per sekund

krown
03-16-04, 05:46 AM
second speed test

Your speed 491 kbps

mccoffee
03-16-04, 12:05 PM
a 491 on 512 line is pretty good i don't know why you are complaing you are never going to get 100 percent of your capps.