cablenut settings please thanks

[irdcamnerd]

im on Mediacom 3000/256
Im running windows 98se

TCP properties for IP = xxxxxx ()
Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows 98; FunWebProducts-MyWay)
Notes: Read the Analyzer FAQ if the above is not your IP address.

TCP options string = 020405b40103030201010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.

Default Receive Window (RWIN) = 256000
RWIN Scaling (RFC1323) = 2 bits (scale factor of 4)
Unscaled Receive Window = 64000

For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product:

Your RcvWindow limits you to: 10240 kbps (1280 KBytes/s) @ 200ms
Your RcvWindow limits you to: 4096 kbps (512 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 51 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 11110000

Precedence (priority) = 000 (routine)
Delay = 0 (normal delay)
Throughput = 1 (high throughput)
Reliability = 1 (high reliability)
Cost = 1 (low cost)

[mccoffee]

Try the following in the tcp optimizer which is below me

select cable on top and custom on bottom

Tcp recive window 64240 maxmtu 1500
mtu discovery yes ttl 64
Black hole detect no
selective acks yes
max dump acks 2

apply changes and reboot

o/o manosteele52

. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.

4. Clear your temporary internet files.

5. Power cycle your modem, unplug it for atleast 15 seconds.

6. Download and update then do a scan with SpyBot 1.2 http://beam.to/spybotsd & Ad Aware 6.0 http://www.lavasoftusa.com/support/download to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.

7. Make sure you do the faster web page tweak in Read1st link.

8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.

9. Install Outpost Firewall http://www.agnitum.com/products/outpost or Sygate Firewall http://www.sygate.com/, both have FREE and Pro versions and are heads above ZA.

10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 http://www.grisoft.com/us/us_dwnl_free.php is an excellent FREE AV app.

11. Make sure you have ALL of the latest Windows Updates.