mountainman
11-05-03, 08:51 AM
I am using Outlook Express to try and send emails and NOTHING is going through. Here is the error message I get. I know that all the settings are good and had the tech guy double check them. He said they looked fine.
Any help would be greatly appreciated. :)
The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was 'xxxx@mac.com'. Subject 'Re: Hey Stan ...', Account: 'ASG', Server: 'mail.xxxxx.com', Protocol: SMTP, Server Response: '550 5.2.1 <xxxx@mac.com>... Mailbox disabled for this recipient', Port: 25, Secure(SSL): No, Server Error: 550, Error Number: 0x800CCC79
edit: After another Google search, this is the only thing I came up with :
Do you have more than one Internet account ?. If you are dialed up or connected through one provider and try to send out a message using the outgoing smtp server of the other provider you will usually get this message. This is due to smtp servers being ip address protected. The server does not accept your ip address because it is not in the designated range for the server. Sometimes you will get an ip address that is valid on the network but may not be acceptable to the server. This usually happens when changes are made to a network/server and not all ip address ranges are added to the appropriate servers.
I would recommend removing the messages from the outbox. Reboot the computer. If you are on dial up, connect and see if a test message that you create and send to your account goes out properly. If it does then try sending to the previous addresses.
And I could not find anything at the Support site of MS.
Any help would be greatly appreciated. :)
The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was 'xxxx@mac.com'. Subject 'Re: Hey Stan ...', Account: 'ASG', Server: 'mail.xxxxx.com', Protocol: SMTP, Server Response: '550 5.2.1 <xxxx@mac.com>... Mailbox disabled for this recipient', Port: 25, Secure(SSL): No, Server Error: 550, Error Number: 0x800CCC79
edit: After another Google search, this is the only thing I came up with :
Do you have more than one Internet account ?. If you are dialed up or connected through one provider and try to send out a message using the outgoing smtp server of the other provider you will usually get this message. This is due to smtp servers being ip address protected. The server does not accept your ip address because it is not in the designated range for the server. Sometimes you will get an ip address that is valid on the network but may not be acceptable to the server. This usually happens when changes are made to a network/server and not all ip address ranges are added to the appropriate servers.
I would recommend removing the messages from the outbox. Reboot the computer. If you are on dial up, connect and see if a test message that you create and send to your account goes out properly. If it does then try sending to the previous addresses.
And I could not find anything at the Support site of MS.