Problems with network adapter

[Pijus]

Visiting now and then CONTROL
PANEL/SYSTEM/HARDWARE/DEVICE MANAGER, today I noticed an interrogation yelow mark in NETWORK ADAPTERS/Microsoft Tun Miniport Adapter. The advise is: this device is not working properly because windows cannot load the drivers required for this device (code 31). Using the troubleshoot I am told to unninstal and reinstal the device, but the system dosn't allow me to do it because «it may be needed for boot». Have tried to udate driver but «there is no better driver», rollback driver, etc. but rhe problem goes on. Anybody knows what to do more to
solve the problem? Many thanks

[AMPLIFRIER]

try a different NIC

AMP

[Storm90]

Have you tried pulling the card out of the computer? Then rebooting and unstalling the drives. Sometimes this will work due to the system will not be able to detect the card and give you the warning about the boot.It sounds like the boot warning is for the card not the system. If this works . Then just reinstall the card and then install the drivers. If the card dose still not work after . I would just replace it. You may have a bad card. GoodLuck!!!!!!!!