Speakeasy DSL Tweaking Help

[electrician123]

Just moved to speakeasy 1.5/768.Was wondering if someone could help me with my cablenut settings.Thanks!!
Windows XP Pro
2800+
1 Gig Ram


TCP options string = 020405b401010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.

Default Receive Window (RWIN) = 64240
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 64240

RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
bandwidth * delay product:

Your RcvWindow limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 57 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000

[earthmofo]

For Cablenut if you haven't done so already download the Cablenut Addon and install it. You can get the Addon here:

Cablenut Update (http://dslnuts.com/update.shtml)

Open Cablenut then choose the File drop down menue then select Open Custom Settings File. Browse to the directory that you installed the Addon and select the WinXP_2K_Cable directory and open the Cable & DSL 1500/386 css file.

Change the DefaultSendWindow setting to 98304.

Click on the Save to Registry button at the bottom then clost Cablenut and reboot so changes take effect.

Take a couple of speed tests to check your speeds.

[mnosteele52]

First read the my help & tips link in my signature to read how to find your optimum RWIN, then use the following settings.

DefaultReceiveWindow = 192000
DefaultSendWindow = 98304
DisableAddressSharing = 1
InitialLargeBufferCount = 200
InitialMediumBufferCount = 480
InitialSmallBufferCount = 640
LargeBufferSize = 819200
MaxFastTransmit = 64000
MediumBufferSize = 150400
PriorityBoost = 0
SmallBufferSize = 12800
TransmitWorker = 32
FastSendDatagramThreshold = 4096
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceive = 0
GlobalMaxTcpWindowSize = value you found
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 0
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = value you found
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 90

VERY IMPORTANT TO DO THE FOLLOWING

1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

3. Make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link (http://forums.speedguide.net/showthread.php?s=&postid=643301#post643301)). If you are using a router make sure you have the latest firmware.

4. Clear your temporary internet files.

5. Power cycle your modem, unplug it for atleast 15 seconds.

6. Download and update then do a scan with SpyBot (http://beam.to/spybotsd) & Ad Aware 6.0 (http://www.lavasoftusa.com/support/download) to remove any spyware then install and update SpywareBlaster (http://www.wilderssecurity.com/spywareblaster.html) to stay spyware FREE. Make sure you use both apps since one will find what the other misses.

7. Make sure you do the faster web page tweak in my Help & Tips link (http://forums.speedguide.net/showthread.php?s=&postid=643301#post643301).


:cool: