PDA

View Full Version : A little help.......Please


Sindonesia
04-08-03, 01:18 AM
I have Dsl thats runs on average about 1160/428. That is on the speed test I run. I'm not sure what the advertised is because it use to be 256/96 but they raised it and haven't advertised it any different.

So sorry not sure of the actual speed is suppose to be. Here is my TCP analyzer.


TCP options string = 020405a00103030201010402
MTU = 1480
MTU is optimized for Windows XP PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1440
MSS is optimized for Windows XP PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.

Default Receive Window (RWIN) = 256960
RWIN Scaling (RFC1323) = 2 bits
Unscaled Receive Window = 64240

For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
506880 (MSS x 44 * scale factor of 8)
253440 (MSS x 44 * scale factor of 4)
126720 (MSS x 44 * scale factor of 2)
63360 (MSS x 44)
bandwidth * delay product:

Your RcvWindow limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms
Your RcvWindow limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 49 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 01011100

Precedence (priority) = 100 (flash override)
Delay = 1 (low delay)
Throughput = 1 (high throughput)
Reliability = 0 (normal reliability)
Cost = 1 (low cost)


I have Cablenut but don't know what settings to use. Thanks for any replies.

mnosteele52
04-08-03, 09:25 AM
Welcome to Speedguide Sindonesia:D, from your speedtest results I'm assuming your caps are 1500/512, please find out your exact caps and post back. For now use the following settings in CableNut:

DefaultReceiveWindow = 192512
DefaultSendWindow = 65536
DisableAddressSharing = 1
InitialLargeBufferCount = 100
InitialMediumBufferCount = 240
InitialSmallBufferCount = 320
LargeBufferSize = 81920
MaxFastTransmit = 64000
MediumBufferSize = 15040
PriorityBoost = 0
SmallBufferSize = 1280
TransmitWorker = 32
FastSendDatagramThreshold = 4096
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceive = 0
GlobalMaxTcpWindowSize = 63360
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 0
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfRetried = 80
TcpRecvSegmentSize = 1440
TcpSendSegmentSize = 1440
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = 63360
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 232

VERY IMPORTANT TO DO THE FOLLOWING

1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

3. Make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link (http://forums.speedguide.net/showthread.php?s=&postid=643301#post643301)). If you are using a router make sure you have the latest firmware.

4. Clear your temporary internet files.

5. Power cycle your modem, unplug it for atleast 15 seconds.

6. Download and update then do a scan with SpyBot 1.2 (http://beam.to/spybotsd) & Ad Aware 6.0 (http://www.lavasoftusa.com/support/download) to remove any spyware then install and update SpywareBlaster 1.2 (http://www.wilderssecurity.com/spywareblaster.html) to stay spyware FREE. It is an ABSOLUTE MUST that you use BOTH Ad Aware 6.0 & SpyBot 1.2, don't think you are safe with just one of these apps since one will find what the other misses.

7. Make sure you do the faster web page tweak in my Help & Tips link (http://forums.speedguide.net/showthread.php?s=&postid=643301#post643301).


:D :cool:

Sindonesia
04-08-03, 01:20 PM
Thanks for the help.:)