please help MNOSTEELE ! [Archive] - SpeedGuide.net Broadband Community

View Full Version : please help MNOSTEELE !


t800_terminator
12-31-02, 07:28 AM
Hi, i just wanted to know if you could give the settings u have to input in my cablenut program for my connection...

-I have Windows XP professional
-An USB DSL modem "ericsson hm120dp" and my provider gives me the following specs for my account: 640/128 kbps

----

TCP properties for IP = 62.211.22.184 (host184-22.pool62211.interbusiness.it)
Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)
Note: Read the FAQ if the above is not your IP address.

TCP options string = 020405ac01010402

MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.

MSS = 1452
Maximum useful data in each packet = 1452, which equals MSS.
MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.

Default Receive Window (RWIN) = 63888
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 63888
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)

bandwidth * delay product:
Your RcvWindow limits you to: 2555.52 kbps (319.44 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1022.208 kbps (127.776 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 52 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 01011100
Precedence (priority) = 010 (immediate)
Delay = 1 (low delay)
Throughput = 1 (high throughput)
Reliability = 1 (high reliability)
Cost = 0 (normal cost)


i would really appreciate it if you could give me the tweaked settings for my specific connection that i have to put into cablenut

mnosteele52
12-31-02, 08:03 AM
Welcome to Speedguide:D, you shoulkd REALLY connect your modem via ethernet rather than USB. USB is slower and troublesome. Either way use the following settings in CableNut:

DefaultReceiveWindow = 81920
DefaultSendWindow = 16384
DisableAddressSharing = 1
InitialLargeBufferCount = 100
InitialMediumBufferCount = 240
InitialSmallBufferCount = 320
LargeBufferSize = 81920
MaxFastTransmit = 64000
MediumBufferSize = 15040
PriorityBoost = 0
SmallBufferSize = 1280
TransmitWorker = 32
FastSendDatagramThreshold = 1024
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceive = 0
GlobalMaxTcpWindowSize = 17424
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 0
TcpLogLevel = 1
TcpMaxDupAcks = 2
TcpMaxHalfOpen = 100
TcpMaxHalfRetried = 80
TcpRecvSegmentSize = 1452
TcpSendSegmentSize = 1452
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = 17424
MaxConnectionsPer1_0Server = 10
MaxConnectionsPerServer = 8
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 92

VERY IMPORTANT TO DO THE FOLLOWING

1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

3. Make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link (http://forums.speedguide.net/showthread.php?s=&postid=643301#post643301)). If you are using a router make sure you have the latest firmware.

4. Clear your temporary internet files.

5. Power cycle your modem, unplug it for atleast 15 seconds.

6. Download and update then do a scan with SpyBot (http://beam.to/spybotsd), anything checked in red is spyware and safe to remove.

7. Make sure you do the faster web page tweak in my Help & Tips link (http://forums.speedguide.net/showthread.php?s=&postid=643301#post643301).

:D ;) :cool:

t800_terminator
12-31-02, 08:08 AM
thank you thank you and thank you again mnosteele, you saved my life .........before the tweak i had in my games always started out with a ping between 700 and 600 and then slowly dropped to like 200 and 100 ....now i start out with 120 and have a stable ping of 85.....again thank you :) :D ;) :cool:

mnosteele52
12-31-02, 08:12 AM
Great, but if you are a gamer then I HIGHLY recommend you getting an ethernet card and connect your modem that way..... gaming will be MUCH better.

:D :cool: